Search results for query: *

1. thanks for the reply 2.config version 12.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Lon02 ! no boot startup-test logging queue-limit 100 enable password vool256 ! ! ! resource-pool disable clock summer-time UK date...

We are using few 5350 we have a problem with one of them, Trying to make a call from our switch to the 5350 gives us a dialtone It doesn’t live the 5350 and goes to the net Checking the history of the call shows that it goes to the dial-peer then shows no circuit, then give a dialtone that all...

Hi Do u know how to set up a Cisco router as5300 with an ISDN BRI card to call only when required? The isdn should be used only when we try to open an ftp session with the remote router TNX for your help

We have few technicians that R working from home We want them to connect through netmeeting to our as5300 And through there to our offices in the world We configured the as5300 like that: voice class codec 1 codec preference 1 g723r63 codec preference 2 g723ar63 codec preference 3 g723r53...

we use the Cisco IOS gk and the other side MVAM we are using same codec but I registered them as remote zone. Cisco is asking for domain but MVAM don't know about this so I put a fictive one but still no connection this is the NVAM log any ideas 021218152713 182 arq.cpp 461...

Hi We have as5300 sometimes we received calls from another router and we need to forward it another router so the call in our router should be configured as voip2voip call (no voip2pots). Is any one know how to configure voip2voip (voip forwarding call) I have ios ver 12.2.5 T TNX Ealan

HI We have few AS5300, each in a different place We want to make a call to another provider but not directly We want to take the call to another Cisco of us that located in another country and forward the call (voip2voip not voip2pots) Is any one has any idea how to configured the dial-peer...

Thanks Iknow about the w2k radius, i'm looking for an independent software ealan

Hi I need a name of a "radius server software" that operates under w2k For the tests we need a freeware or a demo until we decide what to do Thanks Ealan

HI We have few AS5300, each in a different place We want to make a call to another provider but not directly We want to take the call to another Cisco of us that located in another country and forward the call (voip2voip not voip2pots) Is any one has any idea how to configured the dial-peer...

Hi We have as5300 that we use for VOIP termination; one of our customers is using an Arelnet – any try to contact I receive "incompatible destination". The customer doesn’t know how to configure the router, his codec his 723.1 Can I configure my AS5300 so he can go through? The...

Hi We have as5300 that we use for VoIP we are connecting to the net via interface FastEthernet0; we want to connect another connection through interface Ethernet0; (for a specify country terminating calls) 1.Can it be done? 2.if yes, How can I - a. transfer calls that originating from the...

Hi What is the reason that after dialing to another GW we receiving one ring back and then a dial-tone and the call doesn’t go through (the dial tone seems to me as the American dial-tone, and we are dialing to Germany) Is there any thing that I can change so the call will go through (the...

Hi We have two Cisco as5300 between two countries One is for sending the calls and the other is for termination. The one the terminate the calls has one connection to our PBX in the office, to other leg (are not in use right now) we want to connect another office that have another PBX and...

Hi I have as5300 for Voip and I must make connection to provider that uses Cisco 3640 gatekeeper the gatekeeper is connect to a proxy, so I have to contact through the proxy. I need to know how can shuld i Configure my as5300 so I ill contact the Cisco 3640 through the proxy. Thank you

Hi I have as5300 for Voip and I must make connection to provider that uses Cisco 3640 gatekeeper, with proxy and we have problem about the ports Does any one know what we should configure our as5300, Cisco 3640 and the proxy Thank you

Hi We have few AS5300 for Voip all our connection were gateway to gateway and every thing goes well Now we have a contact to a provider that wants us to connect our GW to a GK One pf my colleague told me that connection with RAS will give to the GK information about our providers the ip...

Hi I have a as5300 receiving is internet connection from a hub the as5300 can send calls from the pbx to internet to the destination. incoming calls from outside to the as5300 are not going in (we can not see them when we tries "as5300#sh call active voice brief" no call can go in, i...

if you check that what you will have S0's Active: 19 S0's Active High Water Mark: 30 imeSlot Type TotalCalls TotalDuration 1 pri 809 2d20h 2 pri 838 2d00h 3 pri 836 2d04h 4 pri 764 2d03h 5...

Hi I am using two Cisco’s, the first one can receive and send calls, the second can send calls but not to receive those who try to contact the second Cisco receive busy tone’ with the first on the call go trough (it’s the same dial-peer) Thank for the help