Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
VM Light won't go out
pronei, If you can't turn out the light with the mck key then there is a problem with the PBX. Maybe the card he is on is bad. Try moving him to a different TN on a different card. If there is two sets you will have to do this twice once for each set. The MCK key is a command from the PBX to...- kcales
- Post #16
- Forum: Nortel: CS1000 (Meridian) systems
-
Date and time
You have to use the 1st or second level pwd to change time with rls 3 and up. Don't ask me why it's a Nortel thing. I ran into this myself after upgrading to 4.5- kcales
- Post #2
- Forum: Nortel: CS1000 (Meridian) systems
-
-
VM Light won't go out
Pronei Were you able to turn out the light using an MCK key?- kcales
- Post #6
- Forum: Nortel: CS1000 (Meridian) systems
-
VM Light won't go out
Scenerio: PBX 1 Nortel 81C 4.5 calls PBX 2 81C 4.0 via PRI ties. Number called in PBX 2 is CDP from PBX 2 to Cisco Call Manger 6.1 tied to PBX 2 via PRI with ISGF interface on DCH. When call reaches the Cisco call manager the Name does not appear only the number. This is a Tandem call...- kcales
- Post #5
- Forum: Nortel: CS1000 (Meridian) systems
