Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Configuring Cisco NAC
Anybody out there had any experience of configuring Cisco Network Access Control. I'm trying to configure this to control access to a Cisco 3725 router which allows ISDN (via a Dialer interface) and PSTN (via a Group-Async interface) dialup connections. -
Rx errors on Extreme summit 48i switch
How are you displaying the rx errors? What sort of rx errors are you getting?- UpTheCity
- Post #2
- Forum: Extreme Networks networking solutions
-
DHCP and ESRP
Believe we discovered what the problem was. The reply from the DHCP server was getting confused as the live BD and the resilient BD have the same logical MAC address when ESRP is enabled on the VLAN. The reply appeared to be dropped at the live BD instead of been passed through to the resilient...- UpTheCity
- Post #4
- Forum: Extreme Networks networking solutions
-
VPN Question
Usually you will use a VPN client for remote\roaming users. Concentrator-to-Concentrator (or LAN-to-LAN) will mainly be used as a cheap method of connecting remote offices to the enterprise network. If you had a remote office with say 50 users it the cheapest and most manageable option would be...- UpTheCity
- Post #2
- Forum: Virtual Private Networks (VPN)
-
DHCP and ESRP
ourrob, Thanks for the reply. I think your first suggestion is more relevant. In this case the request will go thru the Resilient BD, then through the Live BD and then to the core edge switch which the DHCP server is connected to. When the reply is sent back I'm suspecting it's not getting...- UpTheCity
- Post #3
- Forum: Extreme Networks networking solutions
-
DHCP and ESRP
We have 2 Black Diamonds, one live the other resilient. All edge switches and stacks have a live connection to the live BD and a resilent connection to the resilent BD. All connected VLANS are running ESRP. The BDs are interconnected using a point-to-point VLAN.ESRP is not enabled on this VLAN...- UpTheCity
- Thread
- Replies: 3
- Forum: Extreme Networks networking solutions
-
1100 SSII switches rebooting
Has anybody come across 1100 SSII switches <br> rebooting themselves for no appearent reason.<br> On one occasion 2 switches in the same stack of 4 (connected via matrix cables)<br> both rebooted themselves. The 2 routers were on seperate power supplies.<br> The setup of the stack is, 1x3300...- UpTheCity
- Thread
- Replies: 1
- Forum: HP Networking solutions
-
56K modems for AS5200 access router
I have a AS5200 access router with Microcom V.34 modems installed.<br> I believe to upgrade to 56k a hardware upgrade is required.<br> Is it still possible to get 56K modems for<br> the AS5200 now Cisco have taken this router<br> off their product catalogue?<br> Also has anyone tried upgrading...
