Search results for query: *

Hi, there I just ran into a issue with my OWA. It was ok to use OWA to reply/create/reply all/forward email w/o problem. However, for some reason, right now, I can only receive email through OWA and CANNOT reply/create/reply all/forward email. I will get a red "X" on the reply section. It looked...

It is a bug in the IOS, Thanks. I got the TAC confirmed from Cisco

I want to have some sort of console control of IP phone. I guess it is not feasible. The situation is like this, I have some phone connected to the switch, and I'm away from home. I can get them registered to the CCM, but how can I test it if some feature like Extension Mobility or hung-group...

Hi, there. I want to remotely manage my 7960 IP phone so I can pratise while I am on the road. I can PCanywhere to my home site, but Is there any way to manager the IP phone remotely? I saw a website called proctorlabs.com, they clains that they can use a remote control system(web page to...

sorry, it is ras rrq ttl command.

Never mind. I found it. It is ras ttl command.

Hi there, When a cisco gateway registered with gatekeeper, in RAS registration, it set the TTL to 60 sec by default. It will cost the gatekeeper around 1 TTL plus 1min to age it out in the case of gateway failure. Can I change the setting of this TTL? Please inform some info to look into. Thanks

The IOS is 12.2(20)SE4. c3560-i5-mz.122-20.SE4.bin BOOT IOS is 12.2(25r)SE. It is not the latest, but it should be close enough. Any thought?

Hi all, I have 4 T1 PRI configured in the same router, so total I have 92 usable channels with voice traffic. I just want to know, how the router selects channels of the 92 channel pool? Is it random or round-robin? It didn't seem like round-robin. Also, I have seen some Line code violation and...

What did you suspect? I will confirm the IOS version tomorrow. However, I am leaning toward the Port-channel command. Since it has etherchannel configured and set the mode to "ON", it might cause the spanning-tree loop as per Cisco's Document if the etherchannel is misconfigured. I saw the...

The topology is like the following. V100 (192.168.43.0) ----------------------------- | | | | | | |----------| Trunk |----------...

Hi, there, I have a interface flapping issue in my network. 2 Cat3560 is connected through 2 trunk port configured with port-channel. When I shutdown one of port in Vlan100, other 2 ports in the same vlan will flap going up and down and OSPF will lose the neighbor. One thing I notice that is...