AH HA Sucess. I really appreciate the info. I added area code 850 to table 1 change the fru level on route 1 to 3 for pattern a and the 850 area code started using the co trunks rather then the T1. and it worked. We also added 770 to table and it started working too. The 770 must be a worldcom...
the two #s being dial are toll numbers within the 850 area code. With the last area code changes Bell south requires the insertion of 850 after the 1 for all toll call changes within the 850 area code. they no longer recognize 1+7. What is the diference between the two t1's ??. The second number...
Local lines are pots long distance is a 24 channel T1 with 4 channels reserved for data I did a print all and did not see anything in tables that seemed to match the patterns. I will supply the printall if it will help.
Merlin legend rel 4.
why would 1-8509379025 & 1-8509379026 receive a fast busy and 1-8509379027 complete ?. When dialed from cell phone call completes.PBX is located in 850 but #'s are toll #'s. Does not seem to be station related. Cant find any tables where these #'s are referred to.
What...
Thanks for the info everybody. A few further questions on DIDs
I did use the butt set and do hear the wink on most of the circuits. After the "wink" what digits should i dial on the butt set the last 3 ei: the station number, all seven numbers. XXX-yyyy or the last four . Hitting the...
A little further info. Because of a business reorganization the merlin legend replaced a definity system which did not seem to be as sensitive to lightning problems. As far as I can tell the ins and out to the system are protected by little black sq plug in units, which I assume are the line...
We have been experiencing DID problems on a Merlin Legend System. They Are normally caused by severe thunderstorm activity during the summertime. My question is two fold.
What can we do to prevent Card damage to Merlin Legend cards due to induce voltage from lightning.Induced on telco lines...
rpg is just like cobol "READ A FILE WRITE A RECORD"
and that makes sense when you think about it. when your reading a file you dont have a clue what the record format is, when you write you better know the format of the record.
this only holds true for extenally defined files...
create a copy of the DDS and change the field containing the date to a date field which will put it in *ISO. then by copying the live file into the new file the date format will be changed from yy/mm//dd to *iso. run query over new file. the origional date field must be defined as zoned...
If you need to remove active users from a subsystem for backup purposes, terminate the qinter subsystem from a cl running in qbatch or transfer your job into qctl then terminate the subsystem. the terminate subsystem "ENDSBS" allows for the suppression of job logs. Restart the...
If you have operations navigator installed on PC ,, check the file shares under the file system. Sounds like you have a file share problem.
Try registering the user you sign on to ftp to Client access also.
The Net server function replaced the virtual drive when client access express was...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.