Search results for query: *

Got it sorted with NTP server. @ Telecomboy : didn't pay much attention to the words but it was current Time n date. It wasn't that tough though to comprehend it. Thanks guys for the tips.

Has any one experienced time and date issue on 1408. Tired changing the time setting tab to None still the handset does not display the current date and time. Also there is not option in handset to set it manually. Not sure if this is the common issue with 1408 as this is the first time i am...

External calls from One X mobile app for iPhone gets connected but goes mute, no auido. Has anyone had this issue before. Any help and suggestion would be appreciated to fix it.Thanks!!

I got bit confused as to how do I block Remote IP 9620L handset from using any phone line be it PSTN/SIP through VPN tunnel. I just want the IP handset to dial out only the internal extension. I have got both PSTN and SIP lines configured. I don't want IP handset to pick any of these line for...

@cruzades,,,no luck with previous config...still rings the main number... Wonder wats wrong ....any clue would be much appreciated ...

@cruzades the ICR config is as below:- 1) Bearer Capability : Any Voice Line Group ID : 10 Incoming number :- Main number Destination :- one of the Extension(100) 2) Bearer Capability : Any Voice Line Group ID : 10 Incoming number :- 1st DID number Destination :- one of the Extension(101) 3)...

@Conigliaro I tried the settings as you metioned above. It still rings the main number. Configured 2 SIP URI First URI Via :- It automatically takes IPO IP add Local URI:- Pilot Number Contact:- Pilot number Display name :- Pilot number PAI:- None Registration:- Selected the number for which...

Has anyone configured this to route the incoming call on SIP to specific DID number ? Have been trying to set up however when tried calling the DID number it straight away rings the main number... I have configured the one SIP URI for incoming and outgoing line ID with Internal data in all those...

Thanks guys for you help... i could get the VPN things up and running now !!!

@tlpeter I used the same doc to configure it the first time... It just keep showing Ike Phase 1 no response... I also verified all the negotiation parameters between Netgear Router n 9620L. Any help would be much appreciated..

Adding more details to my previous post. The connection status on Netgear router shows IPSec SA Not established. VPN 9620 handset settings looks like:- VPN - Enabled VPN Vendor :- Juniper\Netscreen Gateway Address:- Static IP of Netgear FVS336 Router External Phone IP Address :- Remote LAN IP...

I am new in the Avaya world so I have never set up a vpn nor have I worked with Avaya IP phones before. I am working on an Avaya IP office 500 V2 firmware 8.1 Trying to set up a VPN Phone 9620L with a netgear FSV336Gfirewall. I am up to where the phone tries to tunnel into the router but i get...