Search results for query: *

Need to know the proper dipswitch settings. Has been 8 years since needing to do this and getting a bit confused...this is what I'm trying to do 1- DSM 32+ in module 2 2- GATM 8 in module 7 3- GATM 4 in module 6 I believe I now have settings correct for the DSM 32 + in module 2

BCM 400 4.0 can I do a Feat ** startup without losing keycodes I'm replacing a bad BCM with a spare we have that has enough keycodes but still has old programming on it, My options are to just manually go in and change names programming stc or do a starup which is preferable but if I lose my...

1- Is the LAN 2 IP 10.10.11.1 ee_admin xxxyyyzzz! 2- I was told to check the services to see if it is running. Not sure where to find this in programming 3- Most difficult question which not many people may know is, if the hard drive needs to be replaced isn't there special information...

Startalk Flash lost memory, was replaced and that one lost memory a couple days later. I have not been to site yet. They had another tech do all the previous work so no specifics on software level etc. Regardless, here is the issue....The company is sending me out to change the station module it...

Norsar 7.1 Call pilot 2.1 not interpreting the dtmf tone 6 only on PRI If I call into a back up copper line , works fine. If I call the pri main btn from within the same PRI, also works fine. HOWEVER, when IO call from an external source altogether, the 6 is not recognized. "That extension is...

PRI circuit. If you dial the main number everything works fine. Example 781-xxx-xxxx and press say 2 for claims it works fine and transfers to the proper destination. Same with dial by name. THE ISSUE IS THIS If you dial the 800 # 800-xxx-xxxx which is ported to the above 781 number ( same...