Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
IOS/WIC-2T/?? problem on Cisco 2611 router
EB... TAC never specifically asked about memory, but they have a "sho tech" from me. Also received and installed the WIC-1T card and got the same results. Gonna try router on another connectivity that doesn't use IDNX....beginning to think that might be problem. Thanks for the input. -
IOS/WIC-2T/?? problem on Cisco 2611 router
Currently running a Cisco 2500 IOS 11.2(12) with one of the serial ports through an IDNX. I have four spare 2611's with WIC-2T cards & have been trying to get one of them up using IOS 12.3(6a). No problems loading the IOS and configuring the serial port. Local loopback on my IDNX shows both... -
Upgrade from Cisco 2500 to 2611 line protocol up/down via IDNX
Ive done local and remote loopbacks with the following results: Local Loop sho int s0/0 Serial0/0 is up, line protocol is up (looped) Hardware is PowerQUICC Serial Internet address is 198.26.152.66/30 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255... -
Upgrade from Cisco 2500 to 2611 line protocol up/down via IDNX
Currently running a 2500 with IOS 11.2 via an IDNX. Trying to get a 2611 with IOS 12.3(6a) online. Using a very basic config the serial port comes up and the protocol comes up. Line protocol stays up 27 seconds, down for 3 seconds etc. Protocol stays up on local and remote loops. Using BGP...
