Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. cmal00

    PIX 525 6.3 version

    OK, I thought so. I was confuse when it talks about using MAC-LIST, wasn't sure how that worked.
  2. cmal00

    PIX 525 6.3 version

    Can I have a ACL that can permit or deny access from a device coming from the outside by its MAC-Address to a server in my internal network?
  3. cmal00

    Internal Server not working to the outside world

    The reason why I say that is that inside the pix, i can ping 205.143.139.34. From the outside(from my home for example), i can't ping it. I did a debug icmp trace and I see the icmp request from my house coming in through the pix. I don't see any reply from the server. If I clear xlate...
  4. cmal00

    Internal Server not working to the outside world

    I'm sorry, I must of not copy over the static rules. I have the following static static (Vlan5,outside) 205.143.139.0 205.143.139.0 netmask 255.255.255.192 0 0 Vlan5 is our DMZ. These servers are in the DMZ. Also 205.143.139.34 is also our secondary DNS as also being use as an student Web site.
  5. cmal00

    Internal Server not working to the outside world

    Here is the config : Saved : Written by enable_15 at 09:05:10.437 UTC Thu Oct 2 2008 PIX Version 6.3(5) interface ethernet0 100full interface ethernet1 auto interface ethernet2 auto interface ethernet3 auto shutdown interface ethernet4 auto shutdown interface ethernet5 100full nameif ethernet0...
  6. cmal00

    Internal Server not working to the outside world

    I have a PIX 525 and we have an internal web server that external users can not get to. From the inside everything works fine. If we do a clear xlate, it starts to work again from the outside but it doesn't last for much. We have to do another clear xlate. Is there a problem with the PIX or...
  7. cmal00

    Cisco 6006

    Got it working! Thanks
  8. cmal00

    Cisco 6006

    It has CatOS. And yes there is a ip address with a route
  9. cmal00

    Cisco 6006

    I looked at the switch and telnet is enable.
  10. cmal00

    Cisco 6006

    Ok, what about the no pinging?
  11. cmal00

    Cisco 6006

    I have a Cisco 6006 that I can't telnet or ping to it. Yet the switch is up and running. I have three other switches running off it. I can ping the other switches. If I telnet into one of them and telnet from it into the 6006, i get "Password required, but none set". I can ping to it also. Any...
  12. cmal00

    DHCP takes long time

    Still have the problem, any ideas!!
  13. cmal00

    DHCP takes long time

    Have three computers that take for ever to obtain a ip on PXE. If connect a hub on the switch, I get a ip in seconds. we have a 6509, vlan interface is configured for ip address helper, no directed-broadcast. Any ideas?
  14. cmal00

    SSH into PIX

    That was it. Thanks a lot
  15. cmal00

    SSH into PIX

    Not sure what happen but I used to be able to ssh into the PIX. I have the entry ssh ip outside and inside I get a "server unexpectedly, closed network connection" We had a outage and when the PIX came back, I was not able to ssh into it any more. Telnet works fine.
  16. cmal00

    PIX 525 Access-list issue

    I got it working, it turn out to be a server issue. I do however have a problem where I will lose connection on the ssh, by doing a clear xlate, it comes back. I have to do this onces a week. Is this normal?
  17. cmal00

    PIX 525 Access-list issue

    I'll get back on this later, my configuration is over 300 lines.
  18. cmal00

    PIX 525 Access-list issue

    The gateway and submask are correct. I can see the world also. The PIX has to much sensitive data, I'm not aloud to give it out.
  19. cmal00

    PIX 525 Access-list issue

    Also, we have a outside router, from there I can ping the one server that works likes call it serverA, but I can't ping the other server (serverB). Again, they are on the same subnet. There is a route on the outside router via the inside interface that goes to the PIX. (ip.0/26)

Part and Inventory Search

Back
Top