Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. cray27249

    NEC Aspire need to call forward off premise after no answer

    So I would put the speed dial bin number in the transfer target 1 location and set transfer target 2 to 0. Thanks again for your help.
  2. cray27249

    NEC Aspire need to call forward off premise after no answer

    Thank you for the quick response. I tried the second solution and it sent it to the answering service immediately. I don’t see an option for busy / no answer on the programming page for virtual extension 301. The first solution I don’t understand. The DID received number is 9999 The target is...
  3. cray27249

    NEC Aspire need to call forward off premise after no answer

    I have a customer with a NEC Aspire that uses DID over PRI. Calls come in to extension 301 (virtual extension) and ring on assigned sets. They want it to transfer to off premise answering service after 4 rings. Is that set up in the transfer target area? Any help would be greatly appreciated...
  4. cray27249

    Default installer password on ESI IVX E-Class Tele Sys

    I have an ESI IVX E-Class cabinet but do not have the installer's password. Does anyone know the procedure and anything special required; ie, software program, laptop, etc, to default the installer's password? Thanks in advance for the help.
  5. cray27249

    Iwatsu ADIX APS 8.1.5 Need help.

    I am trying to help a friend out with programming a system they got with a newly leased space. I have the software ( Programmer 3.0 ) for the system but mine is only good up to 7.1 if I am understanding correctly. I dont work on Iwatsu systems that often so I really dont want to sink alot of...
  6. cray27249

    Partner R7 w/PCM voice mail card

    I have a Partner R7 with large PCM voice mail card. Messages left from callers on line 1 are garbled. I swapped line 1 with line 3. Trouble went away for a while. Now I have the trouble on messages left on line 3. Is it the processor or the voice mail card?
  7. cray27249

    Cannot get pri d channel to synch on Merlin legend r7

    Changed 100d cards Installed new Processor Upgraded power module Any other suggestions
  8. cray27249

    Audix 3.2 problems

    I have an Audix 3.2 with a Definity switch. I am rebuiliding it due to a power outage and no backup. I am unable to get it to transfer out from the auto attendant. It says it's not a valid option. Can someone help me with this??? Thanks
  9. cray27249

    Activating Message Waiting Lights with DPT integration

    I have a customer with a KXTD-1232 and a TVS voicemail system. We have been able to get everything working with the exception of the message waiting lights. We are using DPT integration. I have plugged in with my laptop and checked all parameters. I have used the trace to view what the voicemail...

Part and Inventory Search

Back
Top