Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
CC6 admin access - SOAP error message
After configuring IE on a supervisors pc and installing SOAP for client access to the CCMA server, the supervisor logs on and when trying to view agents etc, gets the message that the SOAP is trying to access the server via machine name and not FQDN. It then tells me to run changesoapsrv...- Lupin
- Thread
- Replies: 5
- Forum: Nortel: Symposium call center solutions
-
Cisco 1720,s Point to Point over DSL
That's because they're set up for bridging. I don't want to route IP just yet. -
Cisco 1720,s Point to Point over DSL
I'm trying to set up two 1720's point to point over a two wire local loop. The ATM connection comes up but refuses to pass layer three traffic, although when configured for bridging, it passes layer two. Any suggestions ? ip subnet-zero no ip routing ! ! no ip domain lookup ! ! ! ! ... -
Trunking Cisco to 3Com
I'll try and find another way round it. Thanks anyway Gents. -
Trunking Cisco to 3Com
Sorry, my mistake. When I say trunk, I actually mean a bundled channel of four ports that I'm trying to connect the Cisco 6509 and the Corebuilder 3500 together with. Any suggestions ?? -
Trunking Cisco to 3Com
Is it possible to set up a trunk between a Cisco 6509 and a 3Com switch ? I've created a trunk on the 3Com and an ether-channel on the Cisco which seems to work with pings etc. But when the users start to log on, I get lots of collisions and the link becomes unusable. Help ??
