Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. humix1

    3com 4007 and sniffer

    HI I have a question. When i apply a sniffer on a every port of a 3com 4007 (and 3com 7700) i watch traffic unicast (pc to pc) in my lan. i think it's not normal thing, isn't true? anybody else happens it? it's there something parameter to config? Thanks
  2. humix1

    Ping starts then stops 3com superstack II

    have you try to change the pc network card speed and duplex?
  3. humix1

    MAPPING NT network units across router

    Hi i need mapping network units across a router with 2 ethernets.what can i do? Thanks
  4. humix1

    Cisco PIX Config Utility

    HI Yes the software is CISCO PDM (Pix Device Manager). It`s very useful.
  5. humix1

    LOAD BALACING methods

    Hi all i need help for balancing traffic between two PVC in the same router. It must be 60% in one and 40% in the other. CIsco router 3620 IOS 12 Thanks
  6. humix1

    Problems with RMON

    HI We have a cisco 2621. We were in ROMMON mode and we changed a register in a wrong way. After it the boot router appears with strange characters. The question is how we can reset the registers to manufacturer initial config? Thanks
  7. humix1

    Netbios over TCP/IP in router cisco

    Hi I need your help. I have a cisco 1605 with 2 ethernets and i need that the traffic NETBIOS go across the 2 interfaces. i have configured the next lines: ip forward-protocol udp 137 ip forward-protocol udp 138 ip forward-protocol udp 139 ip forward-protocol spanning-tree But when you go to...
  8. humix1

    Netbios over TCP/IP in router cisco

    Hi I need your help. I have a cisco 1605 with 2 ethernets and i need that the traffic NETBIOS go across the 2 interfaces. i have configured the next lines: ip forward-protocol udp 137 ip forward-protocol udp 138 ip forward-protocol udp 139 ip forward-protocol spanning-tree But when you go to...
  9. humix1

    VLAN in the 4007

    HI I need to know how i can do a Vlan between 2 ports in a different modules. Thanks

Part and Inventory Search

Back
Top