I have a CS1000E on Succession 7.5 and UDT PRI cards. The UDT's are configured and working, but on an older firmware release (AB15). After disabling the MSDL in LD96 and loop in LD60, the firmware upgrade is attempted via the UPGUDT Loop-Shelf-Card command, in this case UPGUDT 4 1 4. Every...
I have been trying to find the maximum number of entries allowed per IDC table to no avail. Features and Services NTP provides a good description of the feature, but doesn't mention limits on table entries.
The reason I'm asking is that we have a large contact center and are considering...
I'm attempting to route Atlanta area calls (770, 404, 470 and 678 area codes) from a CS1000 to the PRI in an Atlanta area SRG50. I've tried a variety of methods (CDP, UDP, E.164) in NRS but am unable to successfully route the calls.
Set redirection works fine, local analog stations on the SRG...
I am having an issue with analog stations on an SRG 1.5 with a CS1000E main office on Succession 5.5. I am unable to make long distance calls via the CS1K from SRG analog stations, but can make local calls via the CS1K from SRG analog stations with no difficulty.
The following is a PRI and...
No, not making it past NRS. Whenever dialing locally (between call server and Quintum gateway) calls complete successfully both ways and DCH setup/teardown messages are received.
INAC is set to YES on the virtual trunk route.
AC1 is defined for all call types (INTL NPA SPN NXX LOC).
VTRK's...
Yes, I have configured the BARS access code 9 as an NRS entry. I have tried it as various E.164, CDP and Private special entires but the calls are still rejected by the gatekeeper.
I am having the same problem and am unable to find any useful documentation. Were you able to dial out from the gateway? Can you let me know how you configured NRS to support PSTN dialing?
Thanks,
Dave
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.