Hi everyone,
I am trying to setup a free online router lab for my some of my students ( or whoever wants to use it). I dont want to charge anyone, but i do want them to be able to log in, sign up for time, and access the routers from their homes.
Here is the equiptment i have. 1...
IT WORKS !
I used the follwing lines:
access-list inbound permit udp any any eq domain
access-group inbound in interface outside
static (inside,outside) udp interface domain 192.168.1.4 domain netmask 255.255.255.255
Thanks to all who help me solve this problem!!!
Noktar,
On my previous setup, i had a 2514 connected to my cable modem. e0 was connected to my cable modem and used DHCP and all my clients were connected on e1 that went to a 1924 switch. My clients stations consisted of 1 DNS server and 1 web server (two different machines). I updated the...
Snoop,
The cable modem was provided by my broadband service provider so i didnt have to buy it. And it is not managable whatsoever. This pix not for my office but actually for my home :)
Thats why my outside interface is set to DHCP, if i want a static IP, they would charge me 200...
Hi everyone! I am a total newbie when it comes to dealing with Pix Firewalls. I just bought one right and i plugged it into my cable modem and i want to be able to forward any dns requests to my internal dns server (192.168.1.4). I was using a cisco 2514 with the ip nat inside source...
I tried switching both sets of RAM with my other known working 2501 routers and still no luck. Could it be a mother board problem ? I get a green ok light when i power the unit up... Thanks again to anyone who can help.
Hi everyone, i just bought a cisco 2501 router on ebay and i think i might have gotten ripped off. when i connect the router via hyper terminal i get the following error:
-----------------------------------------------------------
System Bootstrap, Version 5.2(5), RELEASE SOFTWARE
Copyright...
Whats up everyone!
I managed to solve the problem but I can only pinpoint it to one of two things: Either
1)Downloading and installing a newer IOS Version 12.2.16
or
2)Changing from an (IN)active directory integrated zone to a standard primary zone.
Thanks and i hope this helps anyone else...
Hi everyone, i am fairly new to working with routers, so please bare with me. Here is my situation: I have a cisco 2514 connected to my cable modem and i am getting my ip via dhcp on intE0 and running DHCP on intE1 which goes to my switch which will become my DMZ. I want to set up a DNS and...
Curtis,
I know this is PIX forum, but if your clients are all windows nt based, you can very easily set up group policy to block the executables of chat programs. I am a netadmin of a university wide computer lab (700 machines) that is used for academic use only, but students love to install...
Aloha everyone,
I just got a 2514 and i want to be able to connect it to my cable modem. From what i understand, i have to be running IOS 12.2T or above (which i have on it). Does anyone have a running config i can use? Also, Is there a way i can set it up so that the port connected to the...
Thanks for the help so far guys, but no luck yet! I acutally am using a crossover cable, but for kicks i tried to use a straight through, and i was not able to get any thing to pop up on the hyperterminal. If it is a bad load and the break sequence keys dont work, how can i load a new image...
So I am new to this cisco stuff, and i am trying to get my CCNA, so i buy a 2501 on Ebay, set up my hyper-terminal, (9600,8, none, 2, hardware), got my x-over cable plugged in properly to serial port 1, everything checks out, but when it gets to this screen I press enter nothing happens.
* **...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.