I am having an internet problem. I have two Cat 5500's with RSM's. They have a default route of 0.0.0.0 pointing to my PIX interface in order to send all traffic destined to the internet. Lately I have been experienceing internet disruption, the route to the internet will bounce up and down. It...
BGP is a policy based routing protocol, it is like RIP in that it doesn't take any metrics into consideration. You would use it to connect to two ISP's at the same time, thus needing BGP to say.....'go to this ISP' or 'go to that ISP' based on the policies that are set up. For example, you can...
I created a file on the test server (ipNoLookup, a feature with NNM 6.2) that specifies no to resolve names to IP addresses for certain IP's or blocks of IP's. Got the same result.
We are switching to W2K for the reason of lack og Unix support within my company. We only have two Unix guys that are already loaded with work, so for less downtime we went with W2K.
I have a local host file on the box with all the devices within NNM contaied in the file. I run checkdns.ovpl and it returns devices that are in the local host file, but not that of the routers being seen as 'down'. But, then again it is the middle of the day. How can I improve the dns resolution?
I am running NNM 6.2 on W2K on a test server and NNM 6.1 on Solaris on a production server. The W2K server is to replace the Solaris server. Each have an internet container that houses our Internet access routers and policy based internet routers. The test server sees these routers go 'down'...
I have end users on Windows 98/2000 workstations using dial-up networking to connect to our network from home. We are using a cisco 3640 access router and radius for authentication.
- you double click on the dial-up icon
- enter username and password
- a connection is made and the after dial...
I originally had aaa authentication ppp default group radius
, but it wasn't working so i changed it. We're using secureID. This debug is not accurate though. An accurate debug stops at the line:
Aug 15 17:15:05.616: Attribute 3 19 028AD870
We have a terminal window pop up to prompt...
I have a 3640 with a t1, 8 port analog modem and 32 port mica modem bank. i am using an ACE/server RADIUS for authentication but it is not authenticating and i am stumped. i can use any input on this.
version 12.1
service timestamps debug datetime msec
service timestamps log datetime msec...
not sure what your setup is, but you can always use custom queuing. 50% of bandwidth for vlan 1, 50% for vlan 2. can only do this if each vlan comes into the router on different interfaces
in either config mode or interface mode (depending on whether or not you want dhcp on particuler segments) you need to add
ip helper-address "ip address"
this is done on the remote site router. the no ip-directed broacast statement shouldn't have an affect, I have seen configs with...
I have a Cisco 3640 configured for remote user dial-up. We are using an RSA Secure ID/ACE server as a RADIUS server for authentication. I have the router configured for this but it is not working. The log is as follows:
Jul 19 11:40:54.272: %ISDN-6-CONNECT: Interface Serial1/0:0 is now...
HP Openview 6.2 on Windows 2000 Platform. I have ISDN as a backup solution to primary WAN lines. It the ISDN interface is managed on the routers, openview sees the interface as "down", when in reality it is in "standby" mode. How do I monitor the activity of the ISDN backup...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.