With the amount of time you have spent on it surely it would have been cheaper and faster to just get the upgrade licence. Essential edition license R9.0 or what ever version is not an upgrade licence. Only time I have ever seen this happen is when there has been a call made when the system was...
Fairly sure you cant get Listen to do what you want
Have you thought of using Voice Question instead? the only difference I can think of is you can press any key during the recording to follow the next and you will here a beep at the start of the recording
Looks like its fixed. I had to remove the matching short codes in the system short codes and as long as the longer short code (61XXXXX) is first in the LCR then it works as I wanted.
Yea!!!
3.2.53 Tried 3.2.17 to. Also just tried changing the order of the short codes in the LCR table. All that did was switch the order of the problem making the 61XXX work but not the 61XXXXX. It would appear it acts on the first short code it sees.
Thanks for your help but that doesn’t work either. When I dial 61XXX the call just sits there waiting for the extra digits when I dial 61XXXXX it dials as 9161XXXXX
You can see why Im pulling my hair out
Hi All
I am having a problem that is driving me nuts. I am sure I had this working during testing then it just stopped. What I a trying to achieve is to have routing in place should I have a conflict between internal and external number ranges. Due to factors beyond my control I do not have...
Thanks John but that didn’t change anything. it look like there is something left over from my first attempt. The first time I set the IFC as D100 as I was connecting to a D100. However it should have been ETSI (I don’t have the ESTI package and cant get it) so I want to use QSIG.
I can setup a...
Hi Guys i bet this is a dumb question.
I have a 61 running 21.45
I am attempting to add a PRI to use as a QSIG link to an IP Office.
When I try adding the DCH I get this SCH. I have attempted to add this before and used the incorrect IFC. I have since removed (lest i thought I did) all...
Hi
I have a 403 with POTS lines the Telco does not deliver the correct caller ID to allow dial back. E.g for local calls the caller ID includes the area code “9” but not he 0.
What I need to be able to do is if a incoming caller ID starts with a 9 I need to replace it with 09.
Thanks for...
Thanks Guys but that doesn’t help.
Its not on a MSDL it a SPDC
I can’t dis the loop because I can’t dis the DCH. The loop has no trunks and there is not route setup. I have deleted these. All that is left is the DCH.
Do I need to enable to SPDC card if so how? What is the command to delete a...
I am trying to out a DCH and have fist disabled it. However I get a DCH1019 error (DCHI is hardware disabled) after trying to disable it.
Stat is
DCH 15 : RST RLS
I cant remove it because its not disabled.
Also how do I remove a loop. Its done from LD 17 right??
Thanks
Mike
Hi Guys/Gals
I am connecting a option 61 running 21.45 t a Telco using a DMS 100. I think I have done it correctly. But I cannot place a call. What’s the best why of checking the D channel? The trunks are up and idle. I only have a in-service light on the card. So am thing it must be the D...
Nope doesn’t like that either? I do this no problem on my older system. This one (a 61) came for the UK perhaps it’s an odd UK thing? Anyone form the UK have any feedback?
Mike
Hi Guys
I am trying to add an COT but can not make the SIGL LOP. SCH0312 is - Unacceptable signalling for trunk type.
What am I missing? Have posted setup on RDB and COT
Ta
Mike
TN 012 0 08 00
TYPE COT
CDEN 8D
CUST 0
XTRK XCOT
FWTM NO
BIMP 3COM
TRK ANLG
NCOS 7
RTMB 20 1
ATDN 4444...
Hi Guys
I have a 403 with VM Pro and an Analog Trunk 4. I have transfer service from the Telco and have successfully transferred a call back out on the same line using the short code and then dialing the required number manually.
What I need to achieve is to have this done automatically. The...
Hi
I have procomm plus connected to my MM8. I have tried using ct320,vt220 plus others but my mapping must be incorrect. I can repaint the logon page but cant not do anything else. If you can please send or post the keyboard map that would be great.Contact me at http://www.zednet.co.nz/contact...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.