Following Shawn's advice, I got the eval version of DeployCenter 5.5 to try with our x345's. I didn't have the same luck he had.
When the DeployCenter DOS floppies finished loading, the DeployCenter GUI loaded with a busy hourglass cursor, mouse frozen, and sat there indefinitely. I tried...
In the config.sys, I had the following device line:
devicehigh=A:\ipsraspi.sys /F
There were two files that had to be copied to the boot disk: IPSRASPI.SYS and IPSRDOS.IDP, both were provided from the IBM ServRAID boot floppy that was created from the driver CD.
The ASPI driver didn't help me...
the SU2200 should use an RBC12 battery package from APC. The price normally charged for these packages is absolutely absurd. $300-$350 is just way too much!
The RBC12 package consists of two sets of four 12V-7AH batteries. There are normally a good number of people selling these batteries on...
To read the dac960xx RAID cards on slackware, you'll need to load the RAID.s kernel. This is possible off the CD (hit F2 and F3 for details at boot-time), or from floppy if you have the patience.
It sounds like a hardware problem that won't be resolved from any particular distribution, though...
I've had basically the same problems as many have mentioned above while dealing with x345's using the ServRAID 5i. Thus far I have only tried to upload/download images with ghost on RAID-1 arrays consisting of 18gb drives.
First, ghost would be able to detect the logical drive, but when I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.