Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Spanning-tree root bridge selection problem...
I am not running VTP and although it is set up for per-vlan STP there are no VLANs configured. All ports are in VLAN 1 and are access ports. Switch2 links are hard coded to access because the default for that switch is to negotiate trunk and I didnt want to use trunk ports. None of this... -
Spanning-tree root bridge selection problem...
Switch1: Switch1#sh run hostname Switch1 ! no aaa new-model system mtu routing 1500 ip subnet-zero ! spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! interface FastEthernet0/1 ! interface FastEthernet0/2 ! Switch1#sh spanning-tree VLAN0001... -
Spanning-tree root bridge selection problem...
Hey Guys, I am setting up a lab exercise and came across this unusual problem when implementing the lab... The lab is for a simple illustration of STP and its a simple setup with 3 switches: Switch1(3560), Switch2(3550) and Switch3(3560 PoE) connected in a full mesh that looks like a triangle... -
Cannot telnet to switch from PC
Try to exclude the PC by pinging/telnetting from one switch to the other. " I tried this, and this works both ways. These are spare switches used for training exercises (not on the network), but I am able to get to the switches on the network from my PC through SSH. Do you think its got to do... -
Cannot telnet to switch from PC
Hi, I am new to this forum and wanted to ask your help on a problem.. I have a couple of Catalyst 3560 switches which I am trying to setup for telnet access. Heres what I am doing: int vlan 1 ip address 10.0.0.1 255.255.255.0 no shut line vty 0 15 password cisco login transport input all...
