Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. rogue1

    Can't get to proxy server through routers.

    Hi, I fixed it by doing, "c:\>route add 192.168.1.0 mask 255.255.255.0 10.10.10.1" on the proxy server. The server is windows 98 running FreeProxy. Thanks
  2. rogue1

    Can't get to proxy server through routers.

    Hi, I have 2 2507 cisco routers connected with a back to back serial cable. I have 2 networks, 10.10.10.0 and 192.168.1.0 The serial port ip's are 75.75.75.1 and 75.75.75.2 Workstations on the 192. side can log on to a server on the 10. side. All computers on both sides can ping each other. I...
  3. rogue1

    Two 2507 routers, back to back cable, very slow

    I found this in an old post, The available speeds are: R1(config-if)#clock rate ? Speed (bits per second) 1200 2400 4800 9600 19200 38400 56000 64000 72000 125000 148000 250000 500000 800000 1000000 1300000 2000000 4000000 I set mine to 2000000 and it...
  4. rogue1

    Two 2507 routers, back to back cable, very slow

    Thanks oj88 The clock rate was set a 64000. I moved it up to 800000 by guessing at the numbers and it did help. Does any one know the actual numbers to enter to get the maximum clock rate from the serial port on a 2507? If I enter more then 6 digits is says "unknown clock rate&quot...
  5. rogue1

    Two 2507 routers, back to back cable, very slow

    Hi, I have two 2507 routers in a home lab connected with a back to back cable on serial 0. I can ping from, and to, all computers and routers, but transfering a 1 meg file form one computer to another takes about 5 minutes. This is what I have, computer 1 = 10.10.10.4 255.255.255.0, Gateway...

Part and Inventory Search

Back
Top