Hello NetworkGhost,
This means that the permit rule tells the pix which traffic should be encrypted? right.
This means
acesslist splittunnel permit ip 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0
all traffic is encrypted -> no spilt tunnel allowed
accesslist splittunel permit ip central network remote...
Hello,
Should the central PIX act as >>EZVPN<< Server and the cisco VPN Client 4.x on remote side? With auth do you like to use: preshared key or do you like to use certificates?
NTBH
Marcus
Hello forum,
I have a litte problem/question with PIX VPN and Split-tunnel.
PIX OS 6.3.5
I have:
access-list 103 permit ip 192.168.20.0 255.255.255.0 192.168.50.0 255.255.255.0
ip local pool test 192.168.50.0 mask 255.255.255.0
vpngroup test address-pool test
vpngroup test default-domain...
Hello,
I have a litte problem.
First overfew:
192.168.20.x .1(PIX 501 EZVPNSERVER) INTERNET (PIX 501 EZVPN client).1 192.168.30.x
Auth: certificates
Mode: networkextensions.
Nearly erverything is fine. Only one thing goes wrong.
I can connect from 192.168.20.x to 192.168.30.x
I can NOT...
Hello
This works for me
access-list outside_access_in permit tcp any any eq www
static (inside,outside) tcp interface www 192.168.100.100 www netmask 255.255.255.255 0 0
access-group outside_access_in in interface outside
should work...
StomII
Hi
I think there should be no problem in useing ranges.
Mixing acl`s and conduit causes that u can not use the PDM any longer for config (only for monitoring). Using the CLI is ok.
CU
StomII
Hello
Frist I try to describe my situation. At my office I have an Cisco VPN 3015 to terminate IPSEC tunnels. (Soft 3.61) NAT/PAT over TCP 10000 ready.
If I go to the conzentrator using DSL and the cisco VPN Client 3.61 (NAT/PAT over TCP 10000) everything is okay.
But when I try to go over a...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.