Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. davpi70

    How to configure EXP300 for cluster

    Oppssss.... NW6 Cluster is NOT COMPATIBLE with Ibm ServeRAID (Ibm scsi controllers). It is not possible to configure Novell Cluster Services on IBM Exp300. IBM support NW cluster ONLY with Fibre Channel. Davide
  2. davpi70

    How to configure EXP300 for cluster

    I've got an EXP300 (Ibm SCSI storage) and two IBM xSeries360. IBM x360 have Netware6 installed on local drives, and EXP300 with external SCSI link (on IBM ServeRAID 4LX, updated with 5.11 software, the last release). I was not able to configure controllers for cluster. I've done this: - power...
  3. davpi70

    command "SET Reject NCP Packets ......" do not work in autoexec.ncf

    In my autoexec.ncf (NW 4.11 with last service pack) there are two lines: SET Reject NCP Packets with bad components = OFF SET Reject NCP Packets with bad lengths = OFF When server starts, it does not give back errors executing those lines. But the parameters remain set to ON! When the...
  4. davpi70

    AppleTalk

    Yes!! That's right... In autoexec.ncf there was a wrong line "load appletlk routing=no load appletlk pcntnw_1_snap" The correct line is: "load appletlk routing=no BIND appletlk pcntnw_1_snap" "BIND", not "load"!! Thanks! Davide
  5. davpi70

    AppleTalk

    After a crash, this message appears on server console, every 20-30 minutes: 10/01/03 16:08:26 : APPLETLK-5.11-1465 AppleTalk DDP - AppleTalk clients open while stack is unbound Seems that Mac Clients have NO problems... ???? thanks. Davide

Part and Inventory Search

Back
Top