Search results for query: *

Clear any MAC-ADDRESS info on the ASA. Might still be holding the MAC of the old circuit.

Hi All I recently swapped out a WS-X6K-SUP2-2GE engine and the card i replaced it with was an identical model printed on the face plate. But when i did a sh mod i got 2 different models: module 1 = WS-X6K-S2-PFC2 module 2 = WS-X6K-SUP2-2GE Both have PFC2 cards installed. The one in module...

Found the answer in another forum (thanks Mike and NT). Just in case anyone else in interested in the answer. /25[^0-9] will show anything relating to port 25. Cheers

Hi A very simple question. Can i vew traffic in the realtime viewer in ASDM 6.1 for just a specific port? Im trying to see traffic on port 25 but i dont know the filter i need to put in. If i put 25 in there i get too much info with anything including the number 25 etc. If i put TCP 25 i...

ahh damn it!! Schoolboy error, thanks skip top man!

Hello Im trying to get a simple calculation working in Excel I have 4 worksheets that are the monthly quarters and i want the add up the same range on all 4 sheets, but i also need to start with 30 as the number to subtract from the result of the range: I tried this...

Thats correct the switch is on a vlan thats different from the servers vlan. Makes sense now. Thanks for everyones input its appreciated.

Thanks chaps ive now sorted it as ive described above. I used to do as you suggested VinceWhirlwind but that does not work after a ping the entry is still not there. Basically the 6509 is acting as a layer 2 switch passing the routing upto the Core 6513 switch which has all the arp entries in...

Hello Managed to sort it, the switch in question plugs into another 6500 that is the CORE switch, this has all the routing and layer 3 VLAN configuration on it. So i needed to look at the IP ARP entries on the CORE switch and that gave me the IP and MAC, then on the access switch i looked at...

Hello I have a Cisco 6509 switch configured and working how it should. I wanted to look up an IP address to find out what port its plugged into, but when I look at the IP ARP table and it only shows a few entries? I have nearly 300 servers plugged into this switch so why does the ARP table...

Hello Im trying to configure my Cisco 3800 to be a dial router for a few users that may need the access once in a while. I have an ISDN30 configured with just 8 channels for this purpose. When i dial the number i can see the call connect on the router but i get "the remote peer did not...

Thanks for your help plshlpme The Host needed the static entry as when it was left with using a pool it would not work. We added a static entry and it worked. We think its because the application that the host is contacting (Witness call recording server) initiates a connection back in while...

Yes the NAT statements are on the router on our Network. This then allows our private addressing access onto a partners network by being NATTED to one of their private addresses.

Hi Burtsbees Sorry for not replying ive been on annual leave! We dont use more than one FTP server but we rely on NAT to access different servers. So one server hosts an application that users use the other server is a FTP server that the technical teams use. the other is a call recording...

So would my host still use the NAT pool if it were accessing the FTP server rather than using its static 1-2-1 entry for the APP site if i added the extendable to the static entry. So if accessing the APP server my host gets natted to 192.168.1.1 2.2.2.11 But if accessing the FTP server my...

Hi plshlpme Really appreciate your help on this and thanks for finding the info out, it would actually work except for one thing. If my understanding is correct the extendable statement allows the static host entry to be natted to multiple addresses. So in my example: ip nat inside source...

Nothing initiated from the outside coming inbound is allowed as we have ACL's and CBAC controlling outgoing and incoming traffic. My host 192.168.1.1 is natted to 2.2.2.11 when it goes outbound to a server on another network (thats the static nat). But when it needs to access another resource...

Hi Burtsbees Here are snippets with the IP's changed. ip nat pool FTP-PROD-POOL 1.1.1.1 1.1.1.10 prefix-length 24 ip nat pool APP-PROD-POOL 2.2.2.2 2.2.2.10 prefix-length 24 ip nat inside source route-map FTP-PROD-NAT pool FTP-PROD-POOL overload ip nat inside source route-map APP-PROD-NAT pool...

Hello I have a situation where i have had to define a static one to one NAT entry for a host to be able to access a certain application. This works fine. My issue is that this host also needs access to other applications that only allow specific addresses to connect. These are defined in a...

hi plshlpme Thanks for the reply i appreciate it. We manage our own CE router and they obviously manage the PE, we have a 2mb Serial connection to the PE. We do however have a policy map on that outbound connection relating to other applications, so im presuming its going to adhere to that...