I had a KCC problem, so I deleted the replication links between my bridgehead servers in Sites and Services and let Active Directory re-create automatically, which shuold have fixed it. I show in both domains that the changes replicated. Before I had to PING using FQDN server.domain.com, now I...
I have a AD problem all of the sudden.
My PDC has these events, 1311,1567,1568. Also AD Rep Monitor shows a problem with replication to the problem server in our remote office. The remote server is connected through VPN to the corp office. I can ping by FQDN. The remote server is a PDC for our...
From Corp Site I have a PIX. Remote SiteA has a RV082, Remote SiteB has a RV042. I can Remote Desktop to servers at SiteA, but when I try to go to a XP Pro box at SiteB I get a black screen. I have the same problem at the XP Pro box. I can Remote Desktop to a Server in SiteA, but to a server...
For some reason when i try to connect to a XP Pro box across one of our VPN tunnels to a remote office, I get a black screen, then after a minute or two I get an error. The error is," The connection to the remote computer was broken. This may have been caused by a network error. Please try...
After thinking about it I made more sense out of it and i only really need to move about4 hosts on 10.10 side to the 1720 outside ip for their gateway. Just 1 more hop.
Thanks for the help
Another question. If i can reach host 10.10.1.4 or 10.10.1.200 with nat on, but when i remove it I can only ping hosts using the 1720 router as it's gateway and can't ping 10.10.1.4 or 10.10.1.200. With nat on i can ping by ip address any host on the 10.10.1.0 LAN; off only can ping hosts using...
Not needing to NAT, just threw it in troubleshooting config. It will be removed or can be.
PC(10.10.1.X)--->PIX(10.10.1.2)FIREWALL GATEWAY
PC(172.16.3.X)--->(172.16.3.9)1720(10.10.1.74)--->Direct connect to 10.10.1.0 LAN.1720's default gateway is 10.10.1.2
I have the hosts on the 172 lan...
Thanks, I did the above, but on my LAN 10.10.1.0, I can't ping a host behind the router unless i change the gateway of the pc to point to the outside int E0. From behind the router FE0 i can ping any host on the 10.10.1.0 net. If i remove 'ip nat inside' from the config, i can only ping hosts...
I got routing working between both nets, just now i need to block port 80, so no one on 172 net has access to web.
Current config
Current configuration : 1660 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
...
This router is going to route between 2 subnets
10.10.1.0 inside 172.16.9.0 outside. The outiside is currently a network in our plant. So far I can't see what I'm doing wrong. Only thing I haven't added was to block port 80 for the PLC 172.x.x.x network.
!
version 12.3
service timestamps debug...
Oddly enough, I can connect to DR.com through AD Users and Computers from here at Corp Site. Also Create a user in Dr.com, then log on as that user here in the Corp site. Puzzling.
I think the problem is DNS. Here is my dcdiag, though it shows success in replicating, but alot of errors. Also the message, "*Warning: Remote bridgehead DR\DR2 is not eligible as a bridgehead due to too many failures.", how would you make eligible again?
Domain Controller Diagnosis
Performing...
Well at 12:13 i got this error, but i think i can fix this. Or it's already fixed after smoothing things out.
Event Type: Error
Event Source: NETLOGON
Event Category: None
Event ID: 5774
Date: 7/29/2004
Time: 12:13:57 PM
User: N/A
Computer: DR2
Description:
Registration of the DNS record...
I am replicating, because I removed the stale NTDS connection. I checked under _msdcs and the dr2 dc is there now with a new alias 2e13 etc.. It looks to be replicating now I got rid of some bad dns entries. I will check netlogon and ntFrs. I think i have things sorted out. I hope! I didn't...
I got things close to straightend out, but on my NTDS settigns in Sites and services and deleted my connections and recreated them. Then AD did the auto generated connections. On my bridgehead server dc3, it has two connections going to dr2 from site dr. Which one should stay.
connectioned...
Yes I created a site called DR. Which is disaster recovery site. Nope I didn't make a GC, but will now that you mentioned it, it slipped my fried brain There is only two members in the DR site domain. My primary dns serves are AD Integrated. I have two here at Corp domain. When the DR site was...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.