Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Tape Drive Config Issue
fcinfo hba-port HBA Port WWN: 10000000c98214d3 OS Device Name: /dev/cfg/c3 Manufacturer: Emulex Model: LPe11000-M4 Firmware Version: 2.72a2 (Z3D2.72A2) FCode/BIOS Version: 3.01a1 Serial Number: BT84228481 Driver Name: emlxs Driver...- petemkuk
- Post #6
- Forum: Sun: Solaris
-
Tape Drive Config Issue
I have just checked in emlxadm, and see the following: - EMLXADM Device Management Utility, Version 1.00r COPYRIGHT ® 2004-2006 Emulex. All rights reserved. Available HBA's: 1./devices/pci@1,700000/lpfc@0/fp@0,0:devctl (NOT CONNECTED)...- petemkuk
- Post #4
- Forum: Sun: Solaris
-
Tape Drive Config Issue
Sorry - that was an old devlink.tab, this is the current one: - #ident "@(#)devlink.tab.sh 1.72 00/07/17 SMI" # # Copyright (c) 1998 by Sun Microsystems, Inc. # # # This is the table used by devlinks # # Each entry should have 2 fields; but may have 3. Fields # by single tab ('\t')...- petemkuk
- Post #3
- Forum: Sun: Solaris
-
Tape Drive Config Issue
I have a Solaris server running Solaris 10. I have zoned 2 3592 tape drives to it via Brocade 48000 switch. It has emulex cards: - node instance wwpn type fware hardware path status use ======== ======== ================ ===========...- petemkuk
- Thread
- Replies: 6
- Forum: Sun: Solaris
-
volume pool mismatch
We had some tapes that were created on an old server, that has since been decommissioned 12 months ago. A restore has been requested, and we have tried, but it failed with no storage units available. Checking the tapes, they seem to still have all the old attributes - HCART, old volume pool etc...- petemkuk
- Thread
- Replies: 0
- Forum: Data Recovery general discussion
