Search results for query: *

thread940-1665142 Hi, I see that this has ben reported before with a solution of replacing the handset. That's OK if it happens only occasionally, but on one site I have 2 examples within a matter of a singe week. They only have 9 so as a proportion it's quite high and I am concerned that...

Thanks all for your comments. I have resolved the problem. The router was to blame. It appeared to be working OK but when I swapped it for a Draytek all my issues went away. By the way the 132.177.123.13 stun is a service provided by stunserver.org and is freely available. I am using it but...

So the router says. I'm using Lan2 with an internal address through to an ADSL router with NAT Gamma are saying that the voice part of the connection does not have our external address in the handshake so they don't know where to send the voice traffic. Perhaps the IP office doen't send out...

In the Stun server config, Stun is ignored if open internet is chosen and the external IP address is manually set. The IP office registers hence innitial establishment of call is successful and ringing of phones occurs whether a call is outbound or inbound All external ports are forwarded by...

I'm using he 88.215.60.40 address. I will ask them if this is correct and whether I should be using the other address but I there platforms are supposed to be vendor independent so I doubt if it will matter. I assume that you also use "open Internet" rather than using a 3rd party Stun?

Hi kxt308 It's the V3.1 - Username and Password option

Hi I have an IP500 V2 on 7.0 (23) After the usual messing about I got the SIP line working correctly about 2 months ago and all has been working well till Friday morning. Registration is working and a call in or out gets the normal phone ring but when answered no voice is heard in either...

Thanks all for the feedback. The 3rd party route seems the only way forward as 8.0 is unlikely to be with us until sometime in 2012. It does of course double the cost to the client if he happens to use Blackberry and not the I-Phone or Nokia.

Hi all For some strange reason the most popular business mobile is not supported by the IP Office One-X Mobile app. Have I got this wrong. Does anyone have it working or do I go to a 3rd party? Any feedback would be gratefully received

Hi Dain Bramaged We are in Luton, UK Tim

Hi All I haven't bought the Gateway yet but it will be have a BRI interface and connect to a BRI in the IP Office. Sounds from your experience that this will be OK then. recommendation on make of GSM would be appreciated Thanks Tim

Hi I know that One-X will not run over analogue lines, and that ISDN or SIP are to be used, but to save the client money I wanted to connect to his mobile (in or out) via a GSM gateway. Has anyone attempted this and got it working?? Tim

Is there a phone manager sdk/api, if so where would I find such a thing?? Many thanks James

Hopefully someone can help me with this, I would like to know how you feel the NEC SV8100 compares to the IP Office. Now I know alot of the differences but would like to know how you guys feel about it, whether it's a worthy competitor or not (with examples if possible) Many thanks James

I know its not in the compatibility list but has anyone or does anyone know whether you can run one-x mobile client on the samsung i320. It is a windows mobile 5 based device, tried a couple of versions but neither worked. Thanks for your help in advance. James

If you use PRI interfaces then the max ISDN trunks is 240, so at the very least the system should be capable of 240 SIP trunks. 128 max SIP trunks doesn't make sense. Also why would you need 128 VCM channels to run 128 IP trunks. The way it works is that for IP to IP a VCM channel is only...

What is the maximum number of sip trunks you can have into an IP office?? Thanks in advance for your help James

Im using the routing rules in the pop connection manager. Everytime i seem to put a new rule in the routing rules it will either replace one or will get rid of all of the rules i had previously. Is there any way to stop this happening. Thanks James

Thanks guys for the response. It looks as if we rely the Apple emulation for the time being with the hope that a browser option will turn up sooner than later Tim

Hi everyone. Have looked for an update on running Phone manager plus other Avaya software on Apple Mac. The last posting I found was in 2004. Anyone know if this can now be done or do we have to wait till a web browser option becomes available? Tim