Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. edgcmc

    Ipocket and wallboards

    I am trying to setup a serial wall board on a Mitel MiContact Center Virtual server, using an Ipocket232 Serial to Ethernet device. Just not sure what my emulation needs to be set at. Someone out there I'm sure has done this before, any help would be great. Thanks Ed
  2. edgcmc

    Upgrade to 9.0.1.23 MiVocie Business and PRI Audio Issues

    We upgraded our 3300 system to 9.0.1.23 and now both PRI's (from 2 different carriers) are clipping and snapping. This can only be heard on the local side. We opened a ticket with Mitel but so far no luck. These PRI's have been in service for years without a problem. We tried changing the sync...
  3. edgcmc

    Mitel 6940 problem "Current Call Server IP Address"

    We are having the same problem the phone boots and goes green but no buttons or ability to call. When it boots it gets the the proper call server IP and then about 30 seconds later it changes the call server ip to 192.168.1.2 Strange thing is if I go to another site with the exact same DHCP...
  4. edgcmc

    Routing Inbound SIP Trunks through a Mitel SBC to more than one 3300

    I have 50 SIP trunks incoming through an SBC and I have setup my routing to use PBX1 as the primary and PBX2 as the secondary. Then I setup the PBX's with SIP Peer Profiles with a max call paths of 25 calls each(for resilience). My assumption was when I got to call 26 PBX1 would reject the call...

Part and Inventory Search

Back
Top