Search results for query: *

Hi there is there anybody outhere who succesfully configured client windows 95/98/2K to access a Linux VPN??? i use VTUN, right know i'm trying "poptop" http://www.poptop.org/, having some problems but it looks like a good solution....i also saw freeswan but it looks like it doesn't...

I'm not sure if this is the right place to post this: I'm putting up a room with a wiring closet, 4 or 5 Servers, AS400, and other stuff. I wanted to know if there is somenthing that can regulate the temperature, humidity. Also i've heard of special fire prevention that is used in these kind of...

Here's the problem i have a network with 100 PC's and a NT4.0 Server (not a normal server) it's a card which you install on a AS400 with PII 400 and 256MB RAM (the thing is they only use it for filesharing and it's not upgradeable because it cost's too much) but since they want to keep it, i...

Be sure that all the cables work properly.. But my guess is that if it sees the others but the others can't see it is to re-install the Network card driver and all the TCP/IP settings...if that doesn't work i would go ahead and install WIN98SE over again..if that still doesn't work try changing...

I have a problem... I'm formatting my old server, and i'm not sure which RAID to choose. I have 3 Disks IBM 8GB and one IBM 18GB They are on my controller ULTRA16O Adaptec. I'm not sure how to make an ARRAY if my disks aren't all the same, what should i do with my 18gb HD??? what do you guyz...

[peace] Greetings....I have a RAID 5 with 3 IBM HardDisk (cod.9170) each is 8GB they are all in one array and have 0,1,2 as SCSI ID. My operating system is NT4.0 with 6.0 Service Pack. We finished the space on our three drives, so we needed to add a new hard disk[surprise]. We bought a IBM 18GB...

Are you logging on froma a client or Locally?? If you can't convince'em confuse'em

this is my configuration of the Server: -Adaptec ARRAY 1000 Family with 4 disk SCSI attached ULTRA2 LVD -It has NT4.0 Service Pack 5, when i boot the machine it gives me this error: The drive may be corrupted, autochk runs, but looks like it doesn't mount 2 of the 4 HD. So i went into the...

Hi guys, We develop programs in Delphi on a Borland Interbase archive, One of my clients that buys only microsoft and thinks that all the rest is s**t wants our programs to run under SQL SERVER 2000; I explained to him that Interbase is better but he wont budge He doesn't want Linux and doesn't...

hey guys, i have a program that needs to update some files every 6 months on my clients (NT 4.0, 2000, 95, 98), how can i do that automatically from an NT server on a local LAN?? thanx Diego, Milan Italy If you can't convince'em confuse'em

I just installed a Adaptec SCSI 19160 and i only have a Fujitsu MAJ3091MP under the SCSI chain, the problem is that during installation of windows2000 or any Operating System, it doesn't seem to see my HD, i belive this happens because the HD can't terminate the SCSI Chain... how can i provide...

I have a problem installing a server with NT4.0, It has a ADAPTEC SCSI ADAPTER for RAID 2100s, when i try to install NT4.0 it can't see my hard disk. - The controller's utility gives me no problems, i tried to install NT with the RAID configured and WITHOUT but the problem still Persists: - i...

I was running an uprade on my nt4.0 system, when it asked me to reboot, the next thing i saw after rebooting was the menu 1)WINDOWS NT 2)WINDOWS NT (VGA) 3)WINDOWS NT INSTALLATION/UPGRADE if i choose any of these they all give me a blue screen and will not work!! they all prompt me to use...