Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
MICS 6.1 CLID Display Problem
All; thanks for your help and suggestions on this one. RikRodgers and oneofthegirls hit it right on the head... wrong slots. As soon as I reversed the two cards and the system came back up, bingo. It was set to show name first so I reset it to number and covered all the lines. After spending...- squiggy54
- Post #12
- Forum: Nortel: Norstar systems
-
MICS 6.1 CLID Display Problem
I haven't gotten to the customer to apply the fix (switch the cards), but I'm feeling good about this one. I'll post the results upon completion... Thanks- squiggy54
- Post #11
- Forum: Nortel: Norstar systems
-
MICS 6.1 CLID Display Problem
I have a DS card in slot 4 (far right) and the CLID card next to it in slot 3. There are 3 incoming lines and 23 extensions in use plus the voicemail, Star Talk Flash in a Mini cabinet. The system was donated from an old school to the police department, so it's kind of like having an 18...- squiggy54
- Post #8
- Forum: Nortel: Norstar systems
-
MICS 6.1 CLID Display Problem
Both assignments already programmed... no effect. Prime phone and all others only show "line 00X", even with f811 pressed.- squiggy54
- Post #3
- Forum: Nortel: Norstar systems
-
MICS 6.1 CLID Display Problem
I'm having a huge problem getting an MICS running 6.1 XC with a CLID card to display anything but "line 00X" on incoming calls. This occurs at the prime set, and any other set even after entering f811. Waiting for 2nd or subsequent rings has no effect. Yes, I have checked and changed the...- squiggy54
- Thread
- Replies: 11
- Forum: Nortel: Norstar systems
