Search results for query: *

The phone is hanging at DHCP:Discovery, Boot Ver. 02.03.02.05 The WMM is deactivate on the stand

Nop,I using WLAN stand connect to Cisco access point in a Cisco Wireless Lan Controller area. The IP adress 192.168.1.20 is using only for the web access. The authentication is ok on the WLAN controller.

On my 3300Mxe, I have configured a Aastra 480i SIP phone. It's working for internal calls and it receives calls but I'm not able to make an extern call or using my voicemail(8000), when I try it, I have a "call failed". I change the Dial plan in the phone but I have always the error. My cor is...

The WLAN stand don't have any static adress(only one to access the stand's setup by ethernet cable) The DHCP is on a Windows 2003 server

I have some Mitel WLAN stand and I change my DHCP to use option 125 and not 43 and others. Since, my phone stop to DHCP discovery. Before, it was working correctly. Is the option 125 is incompatible with WLAN stand??? If yes, what option I have to use (43???) David Gagnon 3300Mxe 8UR4

My 5302 is working. It receives and sends calls correctly. My question is... when I dial to an internal or external number, there is a delay of 6 or 7 second before the call is "connected". But, if I enter pound key(#) after the number, the call is connected immediatly... Is there an option to...

It's work now... The option 125 must be encapsulated!!! My 5302 goesn in the good Vlan... I rollback my DHCP to Windows 2003 to run the Mitel DHCP helper tool!!

Someone using wireless SIP phone on Mitel 3300Mxe??? I'm getting some information about this subject because i'me note sure a want the Spectralink pricy solution... I know EnGenius make good wireless phone, and they have SIP one!!! I have a Cisco WLAN controller to make my QoS on voice...

Ok... Now, the data type of my option 125 is "String", I guess I have to use "Encapsulated" and use the Mitel DHCP helper tool. I find this information : http://www.cmac1.co.uk/documents/DHCP_Config_helper.pdf It seems to be a good start... Also, my DHCP server is Windows 2008...

Hi, my new 5302 don't get an DHCP adress, I enter a DN and the PIN number and after, the line 1 and the line 2 are blinking... When I go on my DHCP server, I cannot see the mac adress in the table. My option 125 are good because I have many 5224 and 5340. Also, I have enough SIP license...

Solve!!! Just upgrade the firmware of the WET54G and activate the MAC cloning feature...

Hi, We have a Cisco WLAN 4402 with many SSID on VLAN. It works great for laptop but some equipment (ex: Linksys Ethernet bridge, WET54G), the DHCP don't send IP adress and I have to configure manually an adress to work. The DHCP server is on Windows 2003 server... any idea?!?!? thanks

- Line Access - Prime line It was I/C, then, when I choose PoolA, the system return "No free line" when I lift the handset, is there any other option to set????

Hi Is it possible to have the procedure to set an extension to get out automaticaly without press 9. The extension must have a outside line automaticaly when you pick up the phone.. Thank,