Search results for query: *

Running EDC 15.1.19.0 - After selecting settle , my most current batches always settle ok, however 2 dates come up as Failed, these are dates way in the past on days I had issues finding fileserver. After checking with merchant processor, all transactions were correct and did in fact settle, its...

I have a 2 term system both FOH 1220's running xp, both set to master and server capable. Is this the right configuration to avoid any possible issues when refreshing data and searching for master terminal?? Or should I only have one as master capable? Any feedback appreciated

Looking to upgrade the no longer supported XP OS on the BOH fileserver to 7 or vista business ,currently running 6.5.24 Aloha Manager, looking for what the best suggested newer OS would be and how involved the upgrade process is

Im looking for info on how to change the refund limit for Aloha EDC, for example if an employee mistakenly enters an incorecct tip of 600 instead of 6.00 and settles the batch, in order to do a refund, i currently can input card data ie. number and expiration, but when i process it it says...

This is a new version, but i had serviced the HDD in the terminal in question and was told there were some bad sectors, i have a backup HDD ready to swap in when i get my next blue screen. I will change the setting to false, but upon a system refresh will itm.dbf still be copied to the term if i...

Yes, both my terminals are set true to master capable and server capable.

I have a two terminal aloha sytem plus BOH, during a menu update and system refresh from BOH, one terminal boots up fine with new data, the other hangs up on the aloha tableservice splash where in bottom left it says "reading: Items" then gives error that the local file ITM.dbf cannot be read...

No this is an internal enclosed supply with fan that has leads off for powering 2 hdd's and then a snap connector for powering right under the display

Looking for a replacement power supply for a secondary 1220 terminal i have, fan in power supply is no longer working.

Swapped com ports, matched settings no help swapped printer , no help seems to only be happening when aloha first starts up where it reads the data and gathers system parameters, before it goes into the screensaver, where the system prints a few lines of jumbled garbage every couple seconds

if i change boot order to HDD first and maybe network/pxe third or later would that probibit the terminal from refreshing from the BOH server?

I have a problematic 1220 terminal with new HDD running xp pro and tableservice. Occasionally after the system freezes up, upon restard i get a DHCP: with a rotatingn slash (/) and then a PXE-53 Error: No Boot Filename Received. After removing power to the Hard Drive and restarting, i run a...

turned off fifo buffers on attached port, matched baud settings to printer and still daily having a few lines of characters printed, any further suggestions?

is that done via properties of com port on device manager?

I have a terminal running FOH Tableservice that works fine, on XP PRO, all other terminals run XP embedded, my guest check printer attached to com3 works on this terminal, but somtime throughout the night after closeup and before settlement, it prints full rows of jumbled characters line by...

Do all the steps in the FAQ have to be performed on the terminal as well, or is the FAQ geared towards the BOH computer?

I have a two terminal and BOH server Aloha system. One of my terminals is having intermittent HDD issues, i.e. Kernal Stack Inpage errors, etc. My other terminals run XP embedded, this terminal has XP full installed, i am trying to configure it to be my backup terminal in the event my other goes...