Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
why is my cisco 831 causing slow page loads
thanks for the reply ibat but this command didn't work...is it possible it is arp authorized? Also, I do need arp mapping on some internal devices. my arp table did show incomplete status on all the dns servers, is this possibly the cause? My remote telnet access is also really slow... -
why is my cisco 831 causing slow page loads
I have time warner cable and when i connect through my cisco 831 initial page loads are really slow. When connected directly to the cable modem it is zippy. here is my current conf Using 2472 out of 131072 bytes ! version 12.3 no service pad service timestamps debug datetime msec service... -
cisco 831 - lost ability to use SDM to configure NAT
Update - got the 831 router running (no dyndns yet) and added the 1232ag access point with wpa2 passkey enabled. Still running very slow on initial page loads - any ideas on where the delay could be...i'm pretty sure it is a dns thing - like it is doing extra work to translate web addresses -... -
cisco 831 - lost ability to use SDM to configure NAT
here's my current config: Using 2589 out of 131072 bytes ! version 12.3 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname bwsannex ! boot-start-marker boot-end-marker ! enable secret 5... -
cisco 831 - lost ability to use SDM to configure NAT
i've got the 831 working, here are a couple issues I'm encountering 1) there seems to be a long (2-7 second) when going to a website - once the web site is loaded then navigating it is pretty speedy but once going to another web site get's very slow on initial load ... I am changing my... -
cisco 831 - lost ability to use SDM to configure NAT
thanks for responding so quickly. currently I am connecting via console cable and also via fastethernet1. Access to SDM works however I cannot configure NAT. final set up will be: cable modem --> cisco 831 router -->cisco switch devices on network connected to router and switch: cisco... -
cisco 831 - lost ability to use SDM to configure NAT
Hi All- I am a newbie on cisco 831...I've spent days combing the forums and have finally got the router doing basic service via some cli and SDM Express (SDM). I now need to set up NAT port forwarding however I can't do it via SDM because I think when I did some cli configuring I configured some...
