Search results for query: *

Got it fixed..... Went back to site at the weekend and did the following; Saved existing configs Stripped configs from Sw1 & Sw2 Reloaded devices Removed / reseated each stack module Rebooted devices in order and succesfully brough 2960-S Stack up Put new configuration on stack It was...

I have a client with two WS-C2960S-24PD-L devices, both devices have Flexstack modules and are running C2960S Software (C2960S-UNIVERSALK9-M), Version 12.2(55)SE2, RELEASE SOFTWARE (fc1) IOS. The first switch is in use with a running-config on it and due to upsizing the client wants me to add...

I have a small network with 4 access level switches and a core switch . These are in a star topology with the core in the centre and each switch connected to the core via a single Gig trunk Ethernet link. On the 3560 switches we run PVST on each of the 4 VLAN's in use. I find however that two of...

Thanks for your help but we are having more issues with this box now and as it is in a production environment we have decided to get the Cisco TAC guys involved (its covered by 90 day warranty). I will let you know how I get on - once again cheers for your help

Yes - I changed the prompt management via the CUE.

Thanks for the reply - yes 10.1.10.1 is the CUE IP address (default on CUC520). Any ideas???

I have recently been configuring a new CUC520 for a client -using a SIP trunk I am able to call from the PSTN into the CUC520 IP phones and out from the IP phones to the PSTN. I have configured the prompt management number and AA and VM numbers as below but I am unable to call from the PSTN to...

I have recently got a CUC500 for a client and using the CCA software I have been able to set it up as a PBX and get 2 7965G IP phones working off it. I can't get the analogue phone in one of the FXS ports to work? No dial tone and I can't see it on the CCA topology view. So how do you add a...