Search results for query: *

I am attempting to allow remote access to internal test network through PIX and am unable to successfully connect. See config below: access-list 100 permit icmp any any echo-reply access-list 100 permit icmp any any time-exceeded access-list 100 permit icmp any any unreachable access-list 100...

My IOS router hosts multiple L2L customer VPN Tunnels. Some require inside NAT and others do not. For the one that requires inside NAT, I created a pool and everything works great. I just added a new customer who also requires inside NAT. Whenever I try to ping the customer host from inside...

My customer has a need to process inbound helpdesk messages between the hours of 8-5 but would then like those messages forwarded to an outsourced helpdesk between 5-8.

Thanks for the information. Are you aware of any possible solution?

Does anyone know if a function exists that will allow exchange to forward all email to another email address based on what time it is? TIA

Thanks for the info. I have found an app called WinSafe that allows me to get the previous restore points. I am testing now. With the Windows repair install, will that torch the registry as well? I am concerned about the applications on the system as I am told that some no longer have the...

Windows XP Pro experienced a corrupted registry (system) and user could not boot into windows. User then tried to install a second copy of windows into a different folder (have to love the internet) other than c:\windows. I followed this MS KB article: http://support.microsoft.com/kb/307545...

Would you folks be so kind as to review my config and advise. I cannot get the second tunnel (VPN 2) to come up. This tunnel requires that I source NAT my internal traffic destined for their network from a 10.10.X.X to a 10.129.XX.X subnet. _____________________________ Current configuration...

Opps....I do have another question. This 2811 will host multiple VPNS (Remote Access, 2 L2Ls) The L2L are going to two different companies. Once of those companies just asked me to NAT the traffic to a specific network prior to encrypting. I know that I can do that with: IP NAT INSIDE SOURCE...

Thanks for all the help!

Thank you. My issue is that I know I can create multiple L2L vpns under a single crypto map, but I also have a need to incorporate a dymanic remote access vpn into the same map. I did not word my question appropriately! :) Thanks again for the help

I have a need to create multiple L2L VPN Tunnels to multiple customers. What is the syntax to create those tunnels in a single crypto map? TIA

We recently moved and have installed new MPLS WAN circuits. I have made the DNS changes for MX records and websites publicly, and made the appropriate address changes internally, but I am still unable to get mail, web, etc into my network. I am able to access the internet. I am including a...

...arnoldgrant.com vpngroup arnoldgrant split-tunnel arnoldgrant_splitTunnelAcl vpngroup arnoldgrant idle-time 1800 vpngroup arnoldgrant password ******** telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 outside ssh timeout 5 management-access outside console timeout 0 dhcpd...

Thank you. That is what I was thinking it was, but I wanted to eliminate any other possibles. I will post more once I have all the info from the checkpoint. Interesting note: I have enabled logging on the router ported to syslog server for level debugging. The tunnel came down again (same...

Unfortunately, not a great deal. I am seeing a message that Rec'd packet not an IPSEC packet, but I suspect that is due to the acl for this be any any

I honestly do not know and the admin is OOO until monday.

It usually occurs in the morning between 8-10AM EST. The load is about the same as any other time (that is to say nothing but RDP traffic to terminal server) The admin on the checkpoint side doesn't indicate that his logs show any problems. I have requested him to send the settings for his...

I have a 2811 that connects via T1 to a checkpoint device (not ours) via a L2L VPN tunnel. Every day at approximately the same time, the tunnel drops and will not reconnect. If I reload the router, the tunnel reestablishes until the next day. I do have keepalives 10 set. All help is...

...! hostname ROUTER ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging buffered no logging console enable secret 5 ************** enable password 7 ************ ! no aaa new-model no network-clock-participate wic 0 ! dot11 syslog ip auth-proxy max-nodata-conns 3 ip...