Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. leedsit

    QOS labs for MPLS networks

    Hi, Try GNS3Vault, they have some very good material over there. Lee. LEEroy CCNP,CCIP
  2. leedsit

    Internet access authentication and logging

    Hi, Have some guys who have a pretty much flat network(192.168.0.1/24) with a standardard Cisco 5505 natting firewall. Users can bring their own laptops and plug directly into the network or use a few machines scattered around, as well as mobile devices with a couple of Wirelesss access points...
  3. leedsit

    Ok So I've got to October next y

    Hi, It would be a shame to waste the effort you went through to get your CCNA. If I was in your shoes, could you not attempt a professional level Voice exam? One in the CCVP path, that should be relavent to your current job + will renew your CCNA for 3 years. I do know where your coming from...
  4. leedsit

    OSPF and neighbors

    Yup Spot on, I found it very confusing at first. If you set your Router-ID to the same value as your Router in your lab. I.E Router 1 = 1.1.1.1 Router 2 = 2.2.2.2 . . . Router 9 = 9.9.9.9 It makes reading all of your outputs a little easier and you know instantly which router it is. Good...
  5. leedsit

    OSPF and neighbors

    Thinking about this, I think I see where you may be confused. With the output of below, it looks like the whole network has only 1 BDR and 1 DR which is not true, this is from this routers perspective on each interface.... Neighbor ID Pri State Dead Time Address Interface 10.10.5.1 1 FULL/BDR...
  6. leedsit

    OSPF and neighbors

    Managed to get the pic up on my phone. Ok so... Neighbor ID Pri State Dead Time Address Interface 10.10.5.1 1 FULL/BDR 00:00:35 10.10.5.1 FastEthernet0/0 10.10.9.1 1 FULL/DR 00:00:35 10.10.8.1 Ethernet0/0/0 Remember that the 10.10.5.1 and the 10.10.9.1 are the OSPF ROUTER ID`s, not the IP...
  7. leedsit

    OSPF and neighbors

    ...for all 6 participating on ospf, both the routers, thats 8 devices on one subnet all talking ospf. Found the formular, so with 8 devices, n*(n-1)/2 n being devices 8*(8-1)/2 would equal 28 adjacencies/relationships.(think thats right but you get the jist) Using a DBR and DR reduces...
  8. leedsit

    OSPF and neighbors

    Hi, Not fully sure of your Logical Layer 3 setup. However you have to remember that each Layer 2 network, or broadcast domain needs to have a DR and BDR to prevent to many neighborships forming which can have an affect on convergence times etc. Lets say you have a Layer 2 nework, with 10...
  9. leedsit

    Calling any UK 7200 owners

    Hi. Ive managed to loose my CF for my 7200 lab router. I have a new card, however I need to format it from a 7200 serious router before it will work on mine. I have no otherway of getting it up and running with it. So looking for someone to simply plug it into their router and issue a format...
  10. leedsit

    Port Mirroring in VMware

    Ahh after Reading ADB100s reply I understand what your asking, sorry. You could create a unique vlan just for this server with its own subnet(even if its a /30) and place this server in that vlan(presuming you will use .1q tagging to the blade servers). That way you could span the vlan as a...
  11. leedsit

    Port Mirroring in VMware

    Hi, the Cisco 3020 switche is in im presuming HP C7000 chassis and as far as I remember to connect to a virtual port on the 3020 corelating to the slot number, I.E If slot 1, Port 1 etc. you should be able to simply span the virtual port on the 3020 to a physical port on the 3020, I.E Fa0/1...
  12. leedsit

    Settle an argument

    Given a host with an IP of 200.200.200.150, and a subnet mask of 255.255.255.128, is the following considered an acceptable way to write the address in CIDR notation: 200.200.200.150/25" Perfectly normaly, anyone who knows IP well enough will understand what it means, I would personally prefer...
  13. leedsit

    Cisco QoS for Speed Testing Sites

    Hi, just thinking out loud here as its an interesting question. If the users on the LAN side have a specific SLA. i.e 2MB bandwidth etc can you not Shape the traffic from the specific users not to ever go above 2MB on the WAN side? So any traffic inc speed tests should never exceed that? but...
  14. leedsit

    ccna question - cisco netacad correct or cbt nuggets videos

    Hi, Think its in the wording. PACKETS normally refer to Layer 3 entities of data where FRAMES Layer 2. If the Question was FRAMES from one port to another, then your right, MAC Address.. Hope that makes sense. LEEroy CCNP,CCIP
  15. leedsit

    input errors on port channel cisco switch to blade center

    Hi, If you only have 37 input errors, I would`nt worry about it. They may have occured when the Port channel was being established. I use roughtly the same setup and get a few errors on establishment. Rather than force the port channel on, if you use a negotiated setting you probably would`nt...
  16. leedsit

    No routing between physically connected subnets

    Good result! Guess the other gateway doesnt have a route to 172.16.0.0/24 via 10.1.1.28. lee LEEroy CCNP,CCIP
  17. leedsit

    No routing between physically connected subnets

    Hi, are you 100% sure your subnet masks on the servers, routers etc are correct and the same(relative to the subnet)? and your default gateways are correctly the cisco local interface? Lee. LEEroy CCNP,CCIP
  18. leedsit

    Renew CCNP certification

    Hi, Yup, for the CCIP you need Route, MPLS , BGP and QOS. Cheers, Lee LEEroy CCNP,CCIP
  19. leedsit

    Renew CCNP certification

    Sheesh, Monday morning... I checked my post 3 times before posting... Correction.... Hi, Yup, any professional level exam will recertify your CCNP for another 3 years. You dont have to do a professional exam within the CCNP exam scope, you could for example do BGP, Route, QOS, MPLS etc...
  20. leedsit

    Renew CCNP certification

    Hi, Yup, any professional level exam with recertify your CCNP for another 3 years. You dont have to do a professional exam within the CCNP exam scope, you could for example so BGP, Route, QOS, MPLS etc... Cheers, Lee. LEEroy CCNP,CCIP

Part and Inventory Search

Back
Top