Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
How to configure NEC DT700 ITL2E (2 Button-without LED display) IP phones to PABX
Hi Belevedere, Thank you. That will work if you know the IP address. If you don't see below steps to reset to factory default on DT700 ITL-2E 2 button IP Phone (without Display Screen). 1. Press Hold button 2. Press Transfer button 3. Press **331#, this will make the line keys light green 4...- Vundun
- Post #8
- Forum: Data Transmission general discussion
-
How to configure NEC DT700 ITL2E (2 Button-without LED display) IP phones to PABX
Hi All, Thank you for tips on this matter. With a lot of patient I was able to configure all my phones. I got past the DHCP issue by using 8.8.8.8 or u can disable DHCP. Also you don't have to use an isolated POE switch, you can assign your laptop to the IP Phone range and use Tftpd64 which...- Vundun
- Post #6
- Forum: Data Transmission general discussion
-
How to configure NEC DT700 ITL2E (2 Button-without LED display) IP phones to PABX
Hi belevedere, Thanks for the steps. I followed through and am getting this error message when entering DHCP Options in Tftpd64 settings. What am I doing wrong? regards wilfred- Vundun
- Post #3
- Forum: Data Transmission general discussion
-
How to configure NEC DT700 ITL2E (2 Button-without LED display) IP phones to PABX
Hi All, I am trying to add new IP phones to our office, I have configured IP phones with the LED display before. But we have purchased IP phones without the LED display. I have read online and have stated that you need an app called IP Phone Manager to get the default IP address of the IP phone...- Vundun
- Thread
- Replies: 8
- Forum: Data Transmission general discussion
