Search results for query: *

I am trying o set up a button that will allow me to dial a telephone number pause then send a string of digits once the call has been answered. For example 9+212+555-1212 ( pause 6 seconds ) then 1234567890 I have tried several button methods but it will only dial the telephone number but...

I mean what LAN port does traffic go out on? Is that on the Control Unit or configured with the VMP Client manager?

When setting up VMP for voice mail to email using the UCM does it send voice mail to email using the IP Route on the IPO control unit? I have set up the VMP email tab on the VMP Client manager.

Got the CYCLOPS and WOW it's the best stripper I have ever used. No nicks or cuts. It is a little tricky to get use to the band to separates the two ends and insert the cable but I really like it. I can even keep it in my pocket. The CYCLOPS is sold under several names. The least expensive...

Where would I add BIN files for 9.1? Would I add them to the SD card PRIMARY folder?

I have a 9.1 that is working just fine. The customer wants to add a building next door. The other phone room is about 200 feet away. Is it possible to boost a DS cable signal from the control unit via a Cat 6 cable? They do not want to have to go through an upgrade just to get an SCN so they...

I have a large system at a 24/7 call center and I want to provide back up power longer than the 30 mins it has now. INVENTORY IPO 500V2 CONTROL UNIT 12 DS 30 90% of ports being used They want 6 hours of power. What is the best way to calculate a system like this? Does Avaya have a UPS...

I have the SC for the button set as as *7000 Voice Mail Collect "?"7000 and it is still asking for the password

phonebits yes I just changed the USERS Source from H7000 to the hunt group name "Reception Desk" like below: HReception Desk How should I now program a button? Thank you

When I add a contact in my handset using the contacts New feature in the ALL directory of the 9508, will that now show up on all handsets in the system or must I only use the Directory in the Manager to make a contact global?

Yes, H7000 is in the Source and both above suggestions did not work. There is no scroll down selection option for the hung group it is just blank.

I changed it as you suggested and it still asks for a password

Hi snowman50, I followed your instructions and it asked for a password. I entered password and got in. Am I missing something?

Using 9.1 EMBEDDED I am trying to set up a single button for the receptionist that will allow her to record the greeting for the reception group without having to enter a mailbox number and password. Right now she has to dial *17 then enter the group number 7000 then the password. Her...

Edwards 435-BP1 BellI found an old Edwards Signal bell connected to an old Nortel out of service. Has anyone have an experience connecting this to an Avaya ? I connected it to an analog pait but it just goes off hook. I have connected Valcom Bells but they are simple and have a module plug.

I have two of these and am trying to find out how to wire these into an existing Valcom horn paging system that is attached to an Avaya 9.1. It only have two leads.

I am goinig to set up a 7.0 and try to see if the 9611g will boot up.

Only using H323. I changes the SIG from DEFAULT to H323 and rebooted It stayed on Hupgrae.txt for a few mins then right back to : EMPTY SIP PROXY SERVER LIST

I'm sorry, Yes it does. Then it says: RESTARTING Then after about 3 mins it says: EMPTY SIP PROXY SERVER LIST then just waits