Search results for query: *

Any ways, I had to return the wiring closet back to normal. The situation only occured during "peak" hours. Otherwise there were no problems. Unfortunately, I will be leaving this place of business next week so I won't be able to hook them up. No issues after wards which is good. But, still...

No, ISDN which is why it is very odd. Tone Commander 6210Ts and AT&T 8210Ts. The 110RA2-12 allows you to have two ISDN stations on a single port. You just set the stations to have the same port and when they initialize they will have a TEI of 64 or 65. Any ways, they seem to have a bridged...

Since our switch in one building was fully populated, I decided to buy some 110RA2-12 terminal blocks to allow two stations per port. All is well except that now, the two shared stations, can listen in on each other! At first I did not believe them but I tried it myself. Is this normal or is...

I have searched for my answer but I don't think I know the proper terminology to find it correctly. Any ways... Definity G3: My trunk group 3, which is going across FTS, has a comm type of voice. I want to enable both voice and data which is think I would set is avd or rbavd. I just don't know...

It works! Yay! Any ways, one last question: Is Avaya the only company that manufactures a terminating resistor block? I only ask in reference to pricing as it is $103.01 with ground shipping. I am fine with that but its always good to have a few quotes. eb

When you look for solutions be sure to consider all carriers for both voice and data. I mention this as we had the same issue in our building and myself and one other called around for quotes. I got quotes for systems that would cover all carriers for both data and voice. The other guy, who got...

Thanks! Now, I just play the waiting game.

Yes, I did read it, but I don't think you fully read what I wrote and skipped over it. Or, I did fully clarify my scenario. Right now, I am experimenting with two and two only to see if it can do what I want it do on my own. Then, I will move on full-scale which would be for 113 additional...

OK, as I really am new at this... If I buy these two items and configure the port/extensions as required I will be able to put two phones per port? http://www.twacomm.com/catalog/model_BR851B.htm http://www.twacomm.com/catalog/Westek_440a-terminating-filter-adapter.htm I super-duper hope...

I ordered two 440A resistor filter from Westek. I hope its the right model since one Avaya document referenced a 440A and another a 440A4. Any ways, I will make a "splitter" (pg 5-62) similar to the BR851-B since it seems super simple. This should allow me to connect the two phones once I have...

Is that why some of my phones have a switch on the bottom for S/T or 100 ohm? Any ways, I have Tone Commanders and AT&T 8510's but it seems possible and really easy now. I mean, really easy. Thanks! eb

Uhmm... So, in this Avaya manual: http://pdf.textfiles.com/manuals/TELECOM-A-E/Definity%20Installation%20for%20Adjuncts%20and%20Peripherals%20R8-2.pdf On page 5-62, it lists a BR851-B multipoint adapter... so, is it that simple? Other than adding two extension to the specified port... I have...

Oops, I meant to say that I have two B-Channels and one D-Channel and the TN556 supports multipoint so I should be able to have 24 devices per card. But, how?

OK, I am aware of the two types interfaces and termination. In fact, we have ONE 2198 card... unfortunately. What I want is the ability to have two phones off of one port of a TN556 card. Since, I have two data channels I should be able to have two phones. I have also seen devices, and, I am...

1) I am a newbie 2) I have been searching and have fond devices like the ADTRAN NT1 ACE which can convert a 2-wire U-Interface into two 4-wire BRI S/T interfaces. Is there a product that can do the same with the TN556 cards which are 4-wire? It'd be great if I could use both channels for...