Search results for query: *

I have some 3750 that were removed from a stack. The swith has been renumbered to 1, but I cannot do the no switch provision xxxx I get the error "%IDBs can not be removed when switch is active" The switch is: Switch# Role Mac Address Priority State...

I have a couple URS modems dialing remote locations to pull down data. Everytime they dial I get an Error. 29 in the syslog (cant connect to time server). It appears as if the OS doesnt allow two networks to be connected at the same time. It could also be something in the modem driver. any ideas?

Here is what my fluke tell me: 1 0.000000 NetworkA_02:8f:8c Broadcast 0x4744 Ethernet II There isnt a port number, not that I can find anyway. This is mixed in the traffic: 13 5.676442 3630:7235:6531:6742:3447:7053:446d:4d73 2472:344a:5241:4d4c:4e4e:3650:2f32:3030 IPv6 MICP (0x5f) Would...

I am getting a lot of broadcast traffice from our Avaya IP Office system. Any ideas what could be generating it? Weve updated our time server, we are now pointing to: 140.142.16.34 http://support.ntp.org/bin/view/Servers/BigbenCacWashingtonEdu The DNS is correct and everything else looks good...

I dont know how to begin to analyze a SAN system for performance. I have various programs that provide data, but what should I look for?

I have an Engenion 2882 san with two shelfs. I have 3 volumes (2 a little under 2tb, and 1 750gb or so). I have 3 servers attached to the SAN via a QLogic switch. All this is 2GB. Two of the volumes are assigned one controller and the other is assigned the second controller. I am thinking I...

Thats essentially what I have ip nat inside source static tcp 192.168.0.4 80 fastethernet4 80 Its the same thing, FA4 is the WAN interface. There is another one proceeding it, does it matter: ip nat inside source list 101 interface FastEthernet4 overload The source list is all LAN ips.

I use a lot of 1751 routers with DSL. What DSL modems have you guys found to work well with Cisco? You cant manually set the port speeds on most DSL modems, and "auto negotiate" is not an option on a 1751.

Any ideas?

I have a single public ip (static). I have multiple devices behind the router. One of these devices is a surveyllence system (cameras with DVR). It has a web interface that I want to connect to it from outside the network. How do I do that? I still want the other devices to access the internet...

I think I figured it all out. It creates BVi1 or something like that which is the bridge "interface". I then had to make some additional changes.

I cant find any info on "Bridge LAN and Wireless Interface" in SDM Express. I think thats what I want to do, just have a stand-alone AP with WPA PSK. I dont have a radius server, and this connection doesnt need to be very secure. How do I setup a stand-alone AP with WPA PSK?

Thanks!!! So, by using fa4 we can use DHCP, because it refers to an interface not an ip, right? Just so I have this down: We define fa4 as outside and vlan1 as inside. What does this do: router(config)#access-list 101 permit ip 192.168.0.0 0.0.0.255 any router(config)#ip nat inside source...

My ISP is a Charter, and I am using DHCP. The route is a CISCO 877. The cable modem is plugged in to Fastethernet4 (WAN). I can ping www.google.com from the router, but I can get to www.google.com from the LAN (using ping or browser). I can get to the router from the LAN. Please take a look and...

I need to pull data off an old tape. I have a library with lto2 drives. I am currently using Arcserve ver. 9 I dont think the tape is part of any database. Can I use arcserv to read directly from an old arcserve tape?

Thank you. I think the errors are rather benign. The servers is working well; its the clients I sometimes have trouble with. -tjcooper

What is the path of the actlog? I did a search for *.log files and nothing with the name of actlog came up. Thank you, Theron Cooper

I have called Gateway numerous times and have had no luck (no one returned my call). Does anyone know where to purchase a second power supply for a GW 9515?

I have been having this problem for some time now. I go to start the SSM console, login, and nothign happens. I have to end the running app, restart the service, and then it works. It doesnt happen all the time, just often enough its annoying. I noticed these entries in the Application Event...

I have a drive with 5 folders on it. I want to back up all but 1 of the folders. The folders (lets pretend) Folder1, Folder2, Folder3, Folder 4, Folder 5 Wouldnt this work? Is it the most efficient way? Exclude.dir E:\ Include "E:\Folder4\...\*" Include "E:\Folder3\...\*" Include...