Search results for query: *

Yes, according to the use of the 908e, that's what I'm trying to do. Even Adtran tells you how to do it, but they can't figure out why I'm not getting any SIP traffic from the ethernet port.

Networking is done. Adtran- I see NO sip traffic from the unit. It's not talking SIP. I can ping it, log into it via console, log in via port 80, it works otherwise. Audiocodes- I can see it's sip traffic but it's not passing the user name/password. This is not a networking problem, it's a...

Have you successfully been able to connect either of these to Frontier SIP OTT?

Ports are open, etc. Right now, the Adtran is not sending anything to the SIP server for registration. Literally debug sip stacks shows NOTHING. If I could get a good config for either of these units, I'll take care of the rest. I need assistance configuring the Adtran or M800 to at least...

I have that, and even have the Adtran talking on the PRI side. What I'm having difficulty with is the SIP side.

Both of these units are SIP > PRI gateways.

I have both an Audiocodes M800b and Adtran 908e gateway, I'm trying to connect to PRI on my end (9 channel), and Frontier SIP on the other end. Would appreciate (and compensate) anyone who could help with the configuration of either of these 2 devices, preferably the Audiocodes. Thanks

Thanks for the assistance. I think the license is the issue, so I purchased the license, got an activation code, and following Adtran's instructions yields an error that the portal is not available. Adtran refuses assistance because there is no warranty. Gotta love the hostage-holder companies...

I potentially found one issue. 0 licenses. ??

I believe, from what I've been told, it is FXS from the distant end, into a media converter, fiber across campus, into a media converter that is making it back to an fxs and into an FXO on the Cisco.

Local CUCM gurus, sadly, don't exist. The system was installed with very basic training and the contractor vanished. The far side Cisco is being managed by the Police Chief. My employer had some Cisco talent that are no longer available to us.

As an option, could we use the Cisco to, as soon as the call comes in on the circuit, create and ring out a conference? Link to a guide would be excellent. I won't be doing the programming on the CUCM, I'm outside vendor looking to help.

BLUF: I am not a Cisco tech. I know telephony, but not Cisco. I also have no idea about what the 'circuit between' in this configuration is. So I'm going to sound dumb here. We have an inbound circuit from another carrier (not our normal stuff, dedicated across the campus). It comes to the...

GOAL is SIP inbound circuit to PRI into our switch. I literally see no traffic to the SIP server on Wireshark. Nothing. I do see my hits to the web service. ! ADTRAN, Inc. OS version R14.4.1.E ! Boot ROM version R10.9.3.B2 ! Platform: Total Access 908e (3rd Gen), part number 4243908F2SCTL ...

Adtran 908e is not reaching out to the carrier for SIP registration. Carrier finally confirmed it is not. Is someone here willing to look over my config to see what could be causing the issue? I will send in PM for you. Thanks!

Because I'm not connected to the PBX right yet. I'm trying to configure it for plug and play. I can't see any SIP traffic in or out of the adtran, though I've configured it for that. Is there something I need to do to say "Connect to sip thru...." interface or other?

I have a 908e, with an outbound connection to a SIP provider (frontier). I have configured it (no guides from them), but would like to know if the trunk is registering. They won't tell me- which is yet ANOTHER reason I don't want to use frontier for this project. Regardless, Reports-Sip...

Friday, 31 January, at 1500 EST, I have a call with Frontier on our SIP trunks into an Avaya IP Office 500v2 r11.x. I have set up the trunk, it's registered, but is rejecting calls. I thought I had the SIP trunks inbound routing correct, but alas, I have fouled something. Additionally, for...

I am getting a new error to me: "Alarm Indication Signal (Red due to receiving blue)" What is that telling me (besides the circuit is red?) Where do I start troubleshooting? --TIger