Search results for query: *

Static pix-to-pix with 3DES encryption. This set up will require you to have a public IP address to assign to the outside interface of the PIX.

I got it working using a couple of Cisco PIX 506Es. I have not had the opportunity (if you would call it that) to try it using any other gear. I wouldn't recommend doing anything over satelite if there is a way to avoid it! I think if you have a small number of users at some remote site, you...

Thanks to all who responded! The issue was a speed mismatch. It didn't occur to me that the Interface on the Direcway modem was 100 Full until we started posting. My PIX config had the Outside interface as 10 Full as most routers I have worked with (Cisco) would have a 10 Full interface to...

Will need to anonymize the config before I post it...but here is the speed/duplex portion: PIX Version 6.3(5) interface ethernet0 10full interface ethernet1 100full Is it possible that the Direcway modem interface is 10 or half? I have also wondered about MTU since this is satellite. Doesn't...

I wish I had seen this a year ago! Matt, can I encourage your or someone else looking at this thread to tell me why my PIX connecting to a Direcway satellite modem is so slow? See http://www.tek-tips.com/viewthread.cfm?qid=1447210&page=1 Thanks in advance!

access-group acl_out in interface outside

I could be way off here but it looks like you have an ACL that is not applied to an interface?

Brand new here, but I'm at the end of my rope with this!! I have a 506E and Satellite ISP (H...Net) with a Direcway modem. Speed tests are great when the PC is directly connected to the modem (1200 down and 300 up), but they slow to a crawl when I connect my PIX. I can still get to the WWW...