Search results for query: *

ok, i found another place for these settings and they matched... i did however find in the bcm that there is nothing in the routing table under ip trunks, should there be something there?

is there a preferred payload? does this effect bandwidth?

and to answer, no seperate vlan fro voice and data, also thanks a lot for your help!

ok for anyone else who may have this issue the payload setting for the cs1000 are under ipnetwork> nodes,servers,mediacards> vgw and ip phone codec profile> codec g711> ok here are my settings: from cs1000 for g711> voice payload size = 20 voice payout (jitter buffer) nominal delay minimum =...

nevermind i think i found it its under resources>telephony resources>internal ip sets

I do not see a sip tab in the element manager...

I have VLAN setup in the CS1000 but I do not see one in the BCM, and I do not know where to check the payload... Where should I look?

the mpls is a private point to point t1 connection basically, and it only handles data traffic. SIP trunking is VOIP as i understand. also we have servers and workstations on both of these subnets that talk to each other with no problems.

found the ping and yes i am able to ping anything in the phone system.

Attached is a diagram that may help you Summary of Diagram: Telephone 1 is in a sepereate subnet and location Telephone 2 and 3 are in the same subnet and location Telephone 1 and 3 are registered to the CS1000 Telephone 2 is registered to the BCM50 Telephone 1 can dial Telephone 3...

Default gateway is set properly in the BCM and in CS1000

How can I test pinging in the bcm?

Let me start by saying that I am not a phone system guy but understand a little bit about them. Ok my situtation is that I have a remote location that has a BCM50 system and my home office has a CS1000 system (these are linked by a private mpls network on different subnets). We are attempting...