Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. stevenb12

    Accessing the CLI correctly using hyperterminal thru the console

    I was under the impression that a rj45 to rj45 rollover cable would suffice. It has to be db-9
  2. stevenb12

    Accessing the CLI correctly using hyperterminal thru the console

    Supergrrover, We didn't get an rj45 to db9 adapter. However I will buy one immediately. Are there any pinout configurations I need to be aware of?
  3. stevenb12

    Accessing the CLI correctly using hyperterminal thru the console

    North323, The cable is the exact same color, flatness and size however it doesn't have an DB-9 connector instead it has an RJ45 connector on that end. It's has an RJ45 on both ends. I got it from cables and kits.
  4. stevenb12

    Accessing the CLI correctly using hyperterminal thru the console

    I am using an rj45 connector on one end of the rollover and a rj45 on the other end. I got it from cables and kits. It came this way. Could this be an issue?
  5. stevenb12

    Accessing the CLI correctly using hyperterminal thru the console

    I need to access the ASA 5510 to confirm configuration. I connected my rj45 to rj45 rollover console cable to the asa console and then to my laptop ethernet port. I then used hyper-terminal to connect using COM 3 and then configured 9600 baud 8 none 1 hardware flow control. Hyper-terminal...

Part and Inventory Search

Back
Top