Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Router on a stick
You say that you want to make a new ip segment which may suggest a physically separate ethernet segment. This would require a separate ethernet port on the router that would be configured with the new class c address. You may have to take care with the routing protocol to prevent black holes... -
Serial Port Dynamic DTE Clock speeds ?
The clock supplied by the DCE equipment will remain a constant. Dynamic bandwidth allocation is done by traffic shaping not by changing the clock speed. An example will be where you are running a Frame relay circuit. The clockrate may be 2 meg but your confirmed information rate( the guarenteed... -
Router IP Address
As Simon says connect via the console port to your serial port on the PC and run Hyperterminal. If the router has been configured before it will probably have a password set, try cisco as the default. If not you will need to do a password recovery. You can find the procedure clearly documented...
