Search results for query: *

I just borrowed a PRI test set, and I'll go out tommorow and check the carrier output. I should also be able to send into the Merlin and try the routing table. Vantom, I feel your pain. I fought with them for a week on the T-1 itself, and it turned out to be low levels. They still won't cop...

Thanks for your response. If I understand, Dial Plan Routing Table entry number 13 would ring to extension 142, but it rang to 140, the designated unassigned number extension. Is this true? I'm told if there was a change on the module from PRI to T-1, you must default the system and...

Thanks in advance for your help. I'm receiving 4 digits at present, the carrier will accommodate me with either 3 or 4. For example, in the first DID, they are sending 4940. I'm presently supporting 12 analog CO lines, and will need to provide for about 16 DIDs for the cut. Eventually I will...

How do you setup the SPM Monitor to monitor the D-Channel?

Sorry again, range of extensions in 101 to about 165. As you can see in the routing Patterns, I've already tried to route 3 of the DID numbers with no success. A SYSTEM DIAL PLAN A DIAL PLAN FOR POOLS A POOL # 1: 70 A POOL # 2: 890 A POOL # 3: 891 A POOL # 4...

Whoops, bad typist. 253-446-4940 thru 4979. Sorry

I've been trying to do translations on this PRI for some time with no success. Calls go outbound fine, but incoming won't translate with the carrier sending 3 or 4 digits. It goes to the unassigned number extension every time. Carrier is set for AT&T Custom and I'm set for 5ESS. Since I can...