Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. eyespy3017

    T1 taking slips, ckt bounces

    I have chgd the card and cabling. I think it might be a clocking issue, the dchannels are set to EXT clok, but where does it come from? other ckts? if so, would taking other ckts that were cabled up to a CC effect this T1?
  2. eyespy3017

    ATA question

    I have installed 2 ATA's and have dial tone from the jack. Is there anything that i need to in the switch so it can recieve/make calls? Does it need to be assigned a port? I have it wired correctly, but I didn't do any programming
  3. eyespy3017

    Call pick up groups/ringing groups

    Thank you, I actually have never seen MCR used before, actually never knew it existed. Any special software requirements?
  4. eyespy3017

    Call pick up groups/ringing groups

    I have an extension that I would like to have ring on 3 different phones, if somebody does not pick up, then I would like to send it to 3 different phones. Can this be done by assigning 2 different RNPG?
  5. eyespy3017

    Question w/ TGAR and NCOS

    Is it possible build 7 new CDB's (cust's 1, 2 3 4 etc.) with the existing DID's they currently use? Or would I need to get another Block of DID's/NPA/NXX? Is there any "tag" that can be provided by the switch for each indidivual customer when it collects the raw data? I have a 61c
  6. eyespy3017

    Question w/ TGAR and NCOS

    I have everyone under 1 cover as cust 0, but is it possible to split up the CDR to show each individual billing group?
  7. eyespy3017

    Question w/ TGAR and NCOS

    I have a site where there are 7 customers running from my switch and when we get the CDR they are all on one bill per se. How can I have all 7 customers "spit out" individually on the CDR? Not sure if TGAR, TARG, and NCOS have something to do with it. . i.e. Cust A made 1000 calls Cust B...
  8. eyespy3017

    help with adding a phone

    Thank you, so you are saying in the sub closet, they have the LOC/station cables and a patch panel, and all I have to do is run a patch cable from LOC to a possible open port on the patch panel? If that works, how do we program the phone with the desired extension on it?
  9. eyespy3017

    help with adding a phone

    I have never added a phone on a Lucent switch and really need some help... here is what I have: From the LOC(phone jack), to station cables to house pairs in a subcloset, to house pairs to (what I assume) are switch/trunk/station #'s, which then go into the switch. I have toned everything out...

Part and Inventory Search

Back
Top