Search results for query: *

@Firebird Scrambler ahh that's the default, which works best for trunks that are connected to a prvider/the outside world. It basically says that any incoming calls must use an inbound routes. For any trunks that are intra-company/to another PBX in your network, you should use the from-internal...

Sorry for not responding as I've been preoccupied the past couple of weeks and haven't been on here much. @Firebird Scrambler do you have the context on the sip trunk in FreePBX set to "from-internal"? If not, change to that and try making a call from your BCM to your FreePBX.

NVT Phybridge's PoLRE product is nice too if recabling for voip is not an option and you want to go with a brand new voip system. It uses existing single pair phone wire and an adapter at the phone side to convert it from a single pair into Ethernet. I've not used them before, but I've heard...

@AShammah can you post a screenshot of the FreePBX trunk settings?

@AShammah the BCM uses Ext 221 - 226 and 301-305 (221 226 are Digital phones, 301-305 are IP Phones). Each phone has its own Target Line. I chose to match the taget line number to the ext number, but I could have used the lowest target line available for ext 221, etc. Set the line type for one...

I originally was going to have 2 trunks on the FreePBX Side one for internal BCM calls and one for External BCM calls so that I could take advantage of the Public Trunks vs Private Trunks on the BCM side, but I never could get the Private Trunk setup in the BCM to work. From my understand, the...

@AShammah - If you are wanting to page phones on the FreePBX from your BCM you'll want to setup a trunk as I have above and then dial the prefix to access FreePBX from your BCM (in my case 7) then dial the page group extension on your FreePBX. So on the FreePBX all of the phones/doorphones would...

BCM Routing Settings:

More SIP Trunk Settings on the BCM: BCM VOIP Line Settings: BCM Target Line Settings: BCM Public Network Dial Plan Settings: (More screenshots in the next post)

Here are my settings. The IP of the BCM is 192.168.100.4 and the FreePBX is 192.168.100.3. I use custom signalling ports for SIP but the default would be 5060. I have blurred those and written over them with 5060 in my screenshots. Phone phones on the FreePBX dial 2+Nortel BCM ext #. Phones on...

On the Context field for the trunk in FreePBX change it from "from-trunk" to "from-internal" and you won't need to use inbound routes or setup the BCM extensions in FreePBX. At home I have a BCM50 and a Mitel SX-200 ICP tied together with a FreePBX server that I play around with. I'll take some...