Search results for query: *

A customer of mine has attached a PIX to their network for the main purpose of setting up an IPSEC VPN to my Netscreen 100. Problem is, we have the PIX configured and I can ping it (over the internet, not the VPN), but he cannot ping anything whatsoever outbound. The PIX is connecting to the...

Currently we have a 56K frame relay connecting us to our customer location. They have a Cisco 1600 and their internal network is 205.215.201.32 /28 running EIGRP. We are going to be changing that network to 192.168.100.0 /24 and the problem is that network is already being used on our end by...

I want to leave DNS alone and want to do this strictly via IP. Could I do a Static NAT route? Something like.... ip nat inside source static 198.185.201.8 198.185.110.7 Thanks again

The remote locations have a dns name tied to the IP of .8, so when all traffic leaves the remote servers it is destined for .8. I know we could change each of these, but we have hundreds of remote servers and I am looking for a way to just route the traffic destined for our server here to the...

We have a server here in our office that all of our remote customers connect to either via VPN or frame relay. We are going to be putting a new server in it's place in a different state with an IP of 198.185.110.7 and will have connectivity to it via a VPN. Question is.. The IP of the server...

Hello, I worked on this all day and still cannot get Phase 1 to build. Worse than that, it doesn't even try to build. I got the DSL connection working great for their internet conncection, but the VPN was DOA.. Here's the config with the important stuff removed. I can't describe how much...

Not yet, is that the way to go? Have you made it work? Thanks much.

We're getting through Phase 1 fine, but nothing on Phase2. My end is the Netscreen NS100 and the tech working on the Symantec said he's only able to set up phase1 parameters??? Has anybody ever delt with this? Any help would be GREATLY appreciated!!