Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Pix 515 and VPN Client 3 behind firewall using PAT
don't worry your help has been just the stepping stone i needed. i shall look about for am isdn router and feed back to the forum thanks again dan- danhand
- Post #8
- Forum: Security, hacker detection & forensics
-
Pix 515 and VPN Client 3 behind firewall using PAT
winroute works fine (bit of tweeking on w2k). i had been looking at the pix and client logs and could see the initial authentication but one isakmp had finished and ipsec was intoduced it failed. on the pix it got as far as the first "ISAKMP (0): atts are acceptable. Nextpayload is 0"...- danhand
- Post #6
- Forum: Security, hacker detection & forensics
-
Pix 515 and VPN Client 3 behind firewall using PAT
My set up is a w2k server with nat for the inside network. the outside is a cable modem with dhcp addressing. the firewall is zonealarm pro. the client is installed on a w2k machine on the inside. if i disconnect the server and place the client machine on the cable modem all works fine. i also...- danhand
- Post #3
- Forum: Security, hacker detection & forensics
-
Pix 515 and VPN Client 3 behind firewall using PAT
hi hope you have some ideas here. I have just upgraded our pix to version 6.01 and have got the new vpn client 3 working. all is fine unless the client when it is located behind a router at home that uses PAT as it only has one ip address. i have checked the box on ther client that says use NAT...- danhand
- Thread
- Replies: 7
- Forum: Security, hacker detection & forensics
