Search results for query: *

Thanks to all of you for your replies. Yes Viperqq I needed to upgrade the IOS on the 2600. I also needed to configure the E1 controller before the card became visible. controller E1 0/0/0 channel-group 1 unframed

Hello folks, I've just tried installing VWIC 1MFT-G703 WAN cards into two routers, an 1841 (12.4(1c)) and a 2611 (12.2(32)) but I cannot see the interfaces by a "show interfaces" command but I can by a "show diag" command and therefore cannot configure them, am I missing a step in the...

Thanks for the reply, I have documentation from Nortel which says that VRRP can be configured so that with two Contivitys that one can back up the interface of the other. For example B will take As address in the event of an interface failure and vise versa but the question still remains...

Hi, Has anyone out there been able to configure VRRP successfully on Nortel Secure IP services gateway (Contivity Firewall)? I'm having terrible trouble getting it to work. Firstly I have two units, primary and secondary. Regardless of the "serve as master" option being set on the secondary...

Could you possibly have port mirroring configured on any of these ports rather than it being an MLT problem?

Thanks, this answers my question. I'll try this solution, it looks like it should do what I want.

Thanks for the reply, perhaps I can explain it better. The static routes are working fine while the primary firewall is up (10.10.10.68). 10.10.10.70 is a www server that is NATed to another address. If the 10.10.10.68 firewall if powered off should the router be "aware" that this route is...

Hi, I have a question regarding how static routes work on Cisco routers. I have a router with static routes as follows, ip route 10.10.10.70 255.255.255.255 10.10.10.68 10 ip route 10.10.10.70 255.255.255.255 10.10.10.67 40 The 10.10.10.68 and 10.10.10.67 addresses are two Nortel firewalls...