Search results for query: *

When mail comes in it is directed by our firewall to a 2003 server that filters all inbound mail. The problem is the firewall also sends 443 to the proxy server as well. Is there a way on the 2003 server to redirect or forward only the 443 traffic to the mail server for OWA? I want to do this...

We have had a digital/IP video survellience system installed and the multicast traffic is interfering with a network device. I have not setup any igmp stuff on the switch or router so it is all default configuration. Is there a way to disable that traffic to one interface? If not does the...

I am moving my web server to a new location with new external adressing. I would like to know how I can set up the following: 1. At the existing site I need any traffic that comes in to address 111.111.111.111 to be sent back out on the internet to 222.222.222.222 the new site. We are...

I have a cisco 200 router, when I plug a straight through cable into the AUI adapter from a hub into the ethernet port I get an error on my Hyperterminal session that says Bad Cable. Any ideas? THanks Jeremy

Does anyone know how to force a DOMAIN MASTER BROWSER on a W2K Server network? We are having trouble browsing the network through My Network Places. We have Master Browsers but they cannot contact the Domain Master Browser. Thanks, Jeremy

I have done this, now I cannot find the Domain Master Browser. Does anyone know how to force Domain Master Browser or how a computer obtains the role of Domain Master Browser? Thanks, Jeremy

Yesterday of all of our users started having trouble with their network neighborhood and with my network places. I can see all of the computers and server on our local LAN but nothing at any of the remote sites, I can do a search and it will find the computers at the remote sites but it will...

I have several Cisco 2501 and 2514 routers with IOS 10.3 - 12.1. Some have RIP and some have RIP v2. How can I update the routers running RIP to RIP v2? Thanks, Jeremy

Thanks for the help everyone! Jeremy

It worked! Thanks, Jeremy

The router is in production and it is remote, I think I know the write string. What can I do if I do know the write string? Any help is greatly appreciated! Thanks, Jeremy

I can't even gain access to the router because it will not let me past the username prompt. If there is a way around this I would appreciate the instructions. Thanks, Jeremy

I have a Cisco 1602 that asked me for a user name every time I telnetted into it and none of my other routers ever did. I would always forget what the username was so I went in and did a "no username" entry and now it will still ask me for a username but the one I have been using does not work...

I have a Cisco 2501 router that I am having to put static routes for everything not staying on the local network. I tried putting our firewall's ip in as "ip default-gateway xxx.xxx.xxx.xxx" and that did not seem to help. How can I route this traffic out the firewall without putting a static...

This router is running IOS 10.3 and I do not think it supports those commands, do you have nay other suggestions other than loading new IOS? Thanks, Jeremy

Whenever I type this command into a Cisco 2501 router it only displays the cache for E0 and it does not show anything for the Serial port. I have checked other routers and they all have entries for the Serial port. Does anyone know what would cause this? THanks, Jeremy

I am at the HQ site with (4) Cisco 2501 routers, one for each remote site. How should I configure the default gateway on the host computers at the HQ site? Thanks, Jeremy

If I am at the Central Office and there are (4) Cisco 2501 routers, one for each remote site. How do I configure the default gateway on the host PC's at the Central Office? Thanks, Jeremy

Hello All, I am trying to correct the addressing scheme on the company network and I have a question. Currently we are using the public address range 131.131.0.0 - 131.131.255.254 which is our problem that we are trying to fix (We use NAT so that no one on the outside sees our addresses and we...

Hello All, I am trying to correct the addressing scheme on the company network and I have a question. Currently we are using the public address range 131.131.0.0 - 131.131.255.254 which is our problem that we are trying to fix (We use NAT so that no one on the outside sees our addresses and we...